Knives with replaceable plate
-
Side
-
Front
-
Parting
-
Threaded
-
Inside - into the hole
-
Sady
-
Knife holders for holes
-
Spare parts for knives with VBD
-
SWACR 2020 K08 turning knife
SWACR 2020 K 08, 90 ° Knife size: 20x20 mm Front angle: 0 ° Blade angle: 0 ° Blade height: 20mm Overall length: 125mm Changeable blades have WC .. 0804 .. (ie WCMT 0804 .., WCGT 0804. etc.) The key is provided with the key for changing the slices.
In stock37,64 € with VAT -
PTGNL 2525 P22 lathe knife, KARNED
Clearance saleRotary slicer PTGNL 2525 P 22, 90 ° Rotary knife PTGNL-2525P22, 90 ° Cutter size: 25x25 mm Front angle: -6 ° Angle of inclination blade: -6 ° Plate height: 25mm Overall length of blade: 170mm Interchangeable pads have TNM markings. 2204.- E (ie TNMG 2204 ..- E, TNMA 2204 ..- E, etc.)
In stock21,61 € with VAT -
Internal turning knives HM 10 mm, set - 3 pcs(without case)
Set of Inside Professional Turning Knives with Interchangeable Plate Clamping Diameter: 10mm Set of Knives (Left): 1x S10K SCLCR 06 (95 °) for CCMT 0602 / CCGT 0602 1x S10K SDQCR 07 (107,5 °) for DCMT 0702 / DCGT 0702 1x S10K STFCR 11 (90 °) for TCMT 1102 / TCGT 1102 * total length of knives is 125mm < br> 1ks key Art.No. KN 3441640
On request64,82 € with VAT -
Internal turning knives HM 12 mm, set - 3 pcs(without case)
S12M SCLCR 06 (95 °) for CCMT 0602 / CCGT 0602 1x S12M SDQCR 07 (107.5 °) for DCMT 0702 / DCGT 0702 1x S12M STFCR 11 (90 °) for TCMT 1102 / TCGT 1102 plates * total length of blades 150mm < br> 1ks key Art.No. KN 3441641
In stock72,02 € with VAT -
Holder for knives with cylindrical shank 6mm, axial height 16mm
* New item *This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head, after landing on the knife surfaces, settle the blade in the correct position and axial height of 16 mm. After inserting a knife with a 6mm shank and an exchangeable plate into this holder, you will therefore achieve a blade height of ( axial height) 16mm. If you have a lathe for knives with an axial height higher than 12mm, you must add adequate pads under the holder. Length of holder: 77mm Width: 18mm Height: 24mm Photo is illustrative, shows holder for larger knife
In stock16,32 € with VAT -
Double-sided holder for knives with cylindrical shank 6mm or 8mm, axial height 12mm
* New item *This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head settle the blade in the correct position and axial height of 12 mm after landing on the knife surfaces. The holder is double-sided - it is therefore possible to clamp knives with a diameter of 6mm and 8mm. In both cases for an axial height of ( edge height) 12mm If you have a lathe for knives with an axial height higher than 12mm, you must add adequate washers under the holder. Holder length: 64mm Width: 12mm Height: 12mm
In stock9,12 € with VAT -
Double-sided holder for knives with cylindrical shank 6mm or 8mm, axial height 16mm
* New item *This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head, after landing on the knife surfaces, settle the blade in the correct position and axial height of 16 mm. The holder is double-sided - it is therefore possible to clamp knives with a diameter of 6mm and 8mm. In both cases for an axial height of ( edge height) 16mm If you have a lathe for knives with an axial height higher than 16mm, you must add adequate washers under the holder. Holder length: 76mm Width: 18mm Height: 16mm
In stock12,00 € with VAT -
Holder for knives with cylindrical shank 8mm, axial height 16mm
* New item *This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head, after landing on the knife surfaces, settle the blade in the correct position and axial height of 16 mm. After inserting a knife with a 6mm shank and an exchangeable plate into this holder, you will therefore achieve a blade height of ( axial height) 16mm. If you have a lathe for knives with an axial height higher than 12mm, you must add adequate pads under the holder. Length of holder: 77mm Width: 18mm Height: 24mm Photo is illustrative, shows holder for larger knife
In stock16,32 € with VAT -
Holder for knives with cylindrical shank 10 mm, axial height 12 mm
* New item *This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head settle the blade in the correct position and axial height of 12 mm after landing on the knife surfaces. After inserting a knife with a 10mm shank and an exchangeable plate into this holder, you will therefore achieve a blade height of (axis height) 12mm. If you have a lathe for knives with an axial height higher than 12mm, you must add adequate pads under the holder. Holder length: 64mm Width: 12mm Height: 12mm
In stock7,68 € with VAT -
Double-sided holder for knives with cylindrical shank 10mm or 12mm, axial height 16mm
* New item *This guide pad is used for easy and parallel clamping of a turning knife with a cylindrical shank in the knife head. The knife is inserted into the holder and the clamping screws in the knife head, after landing on the knife surfaces, settle the blade in the correct position and axial height of 16 mm. The holder is double-sided - it is therefore possible to clamp knives with a diameter of 10 mm and 12 mm. In both cases for an axial height of ( edge height) 16mm If you have a lathe for knives with an axial height higher than 16mm, you must add adequate washers under the holder. Holder length: 76mm Width: 18mm Height: 16mm
In stock12,00 € with VAT