KMITEX s.r.o.

Hole micrometer, internal cavity micrometer Scope: according to the selected variant With calibration / without calibration: without calibration, unless otherwise stated Division: 0.01mm Further information - see product description for individual variants Carbide measuring tips

Average granite slab Size: according to the selected variant Accuracy : 0 Standard: DIN876, or DIN876/0 Accuracy classes of granite slabs according to DIN876, where L is the length in mm: 00 : 2 + L / 500 um 0 : 4 + L / 250 µm 1: 10+ L / 100 um 2: 20 + L / 50 µm The plate therefore meets the given accuracy according to DIN876 + in addition, it is produced according to more demanding production tolerances - see below. In practice, it therefore has an even more precise flatness than the DIN876 standard. Manufacturing tolerance of granite slabs, where L is the length in mm: 000 : (0.003 x L + 2.5)/4 µm 00 : (0.003 x L + 2.5)/2 µm 0: (0.003 x L + 2.5) µm 1: (0.003 x L + 5) um Material: the best quality black granite from a granite mine - natural granite Specific density: 2970-3070kg/m3 Strength: 245-254 MPa Elasticity: 120-127 GPa Coefficient of expansion: 4.61 x 10-6 / °C Water absorption: < 0.07% Hardness v. Shore : 70 hours ago Advantages of granite slabs: 1. High accuracy, shape and dimensional stability under standard temperature conditions 2. No rust 3. Highly abrasive black granite with a long service life 4. Any snags, scratches or similar accidents when using black granite products do not cause "material roll-out" and do not affect accuracy 5. Non-magnetic 6. The almost mirror-smooth surface enables smooth movement of the measured part or measurement during measurement If you have not found a suitable granite slab, write to us - we can provide a granite slab up to the size of 10000 x 4000 mm.

Digital three-touch cavity meter / digital three-touch Scope: according to the selected variant Division: 0.001 mm Standard: DIN863 The setting ring is part of the package for micrometers up to a diameter of 100 mm. From a diameter of 100 mm (inclusive) it is supplied without a ring.

Digital position measurement, in the horizontal axis - digital displacement / measuring bar Moving range: according to the selected variant Possibility of measuring in inches and millimeters Resolution: 0.01mm Maximum measurement speed: 1.5m/s LCD display Battery 1.5v silver-oxide Option to set 0 At the ends, handles for attachment to the machine

Sliding gauge, slider, slider with fine adjustment Scope: according to the selected variant Length of the jaws: according to the selected variant Division: according to the selected variant Locking screws The slider enables internal measurement from 10mm Material: steel Each slider has a serial number

Sliding gauge, slide, slide, monobloc / monolithic body Scope: according to the selected variant Length of the jaws: according to the selected variant Division: according to the selected variant Locking screws, fine adjustment The scale is also capable of internal measurement from 10 mm Material: steel Each slider has a serial number