Key type drill chuck with thread clamping , ČSN 241320

Variant:

Choose variant

1,5-10,0 mm - UNF 3/8"	In stock (7x)	2,67 € with VAT
1,5-13,0 mm - UNF 1/2"	In stock (124x)	4,43 € with VAT
1,5-13,0 mm - UNF 3/8"	In stock (33x)	4,43 € with VAT
3,0-16,0 mm - UNF 1/2"	In stock (202x)	6,15 € with VAT
3,0-16,0 mm - UNF 5/8"	In stock (78x)	6,06 € with VAT
1,5-10 mm - M14x2,0	On request	10,51 € with VAT
3,0-16,0 mm - M16x1,5	In stock (9x)	13,85 € with VAT
3,0-16,0 mm - M18x2,5	In stock (5x)	13,85 € with VAT
3,0-16,0 mm - M18x1,5	In stock (6x)	13,85 € with VAT
3,0-16,0 mm - M18x1,0	In stock (4x)	13,85 € with VAT

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

Warranty:: 24 months

Product information

Drilling head with handle - classic design

Clamping range: according to the selected variant
Clamping thread: according to the selected variant

Clamping pins for these chucks can be found in related products.

Application: Hand drills with thread clamping (Narex, Dewalt, Makita, Extol and other drills)

Standard: ČSN 241320 / CSN 24 1320

If you are changing the chuck, look at the body of the existing chuck, the type of thread should be stamped on the body. If you are unsure, measure the thread diameter and respond.

Variants

1,5-10,0 mm - UNF 3/8"

Code: 241320-015-100-3/8-24UNF

In stock

2,67 € with VAT

1,5-13,0 mm - UNF 1/2"

Code: 241320-015-130-1/2-20UNF

In stock

4,43 € with VAT

1,5-13,0 mm - UNF 3/8"

Code: 241320-015-130-3/8-24UNF

In stock

4,43 € with VAT

3,0-16,0 mm - UNF 1/2"

Code: 241320-030-160-1/2-20UNF

In stock

6,15 € with VAT

3,0-16,0 mm - UNF 5/8"

Code: 241320-030-160-5/8-16UNF

In stock

6,06 € with VAT

1,5-10 mm - M14x2,0

Code: 241320-015-100-M14x2,0

On request

10,51 € with VAT

3,0-16,0 mm - M16x1,5

Code: 241320-030-160-M16x1,5

In stock

13,85 € with VAT

3,0-16,0 mm - M18x2,5

Code: 241320-030-160-M18x2,5

In stock

13,85 € with VAT

3,0-16,0 mm - M18x1,5

Code: 241320-030-160-M18x1,5

In stock

13,85 € with VAT

3,0-16,0 mm - M18x1,0

Code: 241320-030-160-M18x1,0

In stock

13,85 € with VAT

Show all variants

Accessories

Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK2 taper

MK2 Cone Thread Type: UNF Number of strokes per inch: 20

In stock

7,10 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK3 taper

MK3 Cone Thread Type: UNF Number of strokes per inch: 20

In stock

7,37 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK1 taper

Drilling spindle for heads with 1/2 "clamping thread - 20 UNF (1/2" -20 UNF)

In stock

6,81 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK2 taper - for clamping in the milli

Milling spindle for clamping internal thread drill chucks. MK2 Cone 10mm Conical Thread For Clamping 1/2 "20UNF Female Thread Chucks

In stock

7,78 € with VAT

Choose variant
Mandrel for drill chuck with 1/2 inch 20 UNF thread, MK3 taper - for clamping in the milli

Milling spindle for clamping internal thread drill chucks. MK3 Cone 12mm Taper Inner Thread For Clamping 1/2 "20UNF Female Thread Chucks

In stock

8,01 € with VAT

Choose variant