Karnasch - Germany

Two-stage cobalt drill Drilled diameter / countersink diameter: according to the selected variant Tip angle: 118 ° Material: cobalt HSS-XE steel Coating: TITAN-TEC Standard: DIN1897 Usage: Steel with strength up to 500N / mm2 Steel with strength up to 800N / mm2 Steel with strength up to 1000N / mm2 Stainless steel with strength up to 900N / mm2 Stainless steel with strength over 900N / mm2 Cast iron, aluminum Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for milling, grooving, contouring of composite materials / without front edges / series 116001 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with front edges / series 116002 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with two front edges / series 116003 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with drill tip / series 116004 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 22100

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No .: 22.1020

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable coolant plates and rings are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221030

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221040

Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Steel with strength up to 1365 MPa Stainless steel with strength above 900 MPa Cast iron up to 400HBW strength Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. No. : 22 2010

Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with Alu-Tec coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Aluminium, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 3010

Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 144° Material: sintered powder steel 15 with Alu-Tec coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Aluminium, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 3510