ISO S system

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions and list of spare parts - see enclosed catalog sheet. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Insert holder SDHCR 2525 M 11, 107,5 Â ° External turning tool SDHCR-2525M11, 107,5 Â ° Cutter has size: 25x25 mm Height of running plates: 25mm Total length of knife: 150mm Interchangeable plates are marked DC. . 11T3 ..(ie DCMT 11T3 .., DCGT 11T3 .. etc.) A key for exchanging the blade is supplied with the goods. The insert is not included in the delivery

SSSCR 1212 F 09 Replacement Socket Holder, Ideal for Edge Sharpening SXCR 1212 F09 Knife Socket: 12x12 mm Front Angle: 0 ° Angle blade slope: 0 ° Plate height: 12mm Overall length of knife: 80mm Replacement plates are marked SC..09T3 .. (ie SCMT 09T3 .., SCGT 09T3 .. etc.) The key is provided with the key to change the slicer.

SSSCR 2020 K 09 Interchangeable Socket, ideal for Chamfering Edge Angle blade inclination: 0 ° Plate height: 20mm Overall length of knife: 125mm Replacement plates are marked SC..09T3 .. (ie SCMT 09T3 .., SCGT 09T3 .. etc.) The key is provided with the key to change the slicer.

Knife holder SVHCR 2020 K 16, 107.5 ° Knife for external turning SVHCR-2020K16, 107.5 ° Knife has a dimension: 20x20 mm Angle of the face: 0 ° Blade angle: 0 ° Plate height: 20mm Overall length: 125mm Plate inserts are marked with V ... 1604 .. (ie VCMT 1604 .., VBMT 1604 .. , VCGT 1604 .. etc.)

Insert holder SVJBR 1616 H 16, 93 Â ° External turning tool SVJBR-1616H16, 93 Â ° It has dimensions w: 16x16 mm Insert height: 16mm Total knife length: 100mm Replacement inserts are marked VB .. 1604 ..(ie VBMT 1604 .., VBGT 1604 .. etc.) The goods are supplied with a key for exchanging the slice

Replacement blade holder SVJBR 2525 M 16, 93 ° External turning tool SVJBR-2525M16, 93 Â ° It has dimensions r: 25x25 mm Height of running inserts: 25mm Total length of the knife: 150mm Interchangeable inserts are marked VB .. 1604 ..(ie VBMT 1604 .., VBGT 1604 .. etc.) The goods are supplied with a key for exchanging the slice