ISO D T system

Left holder for exchangeable inserts / knife for external turning, clamping with thumb via clamp from above Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for exchangeable inserts / knife for external turning, clamping with thumb via clamp from above Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left insert holder TWLNL 2525 M 08, 95 ° External turning tool TWLNL-2525M08, 95 Â ° The size of the knife â € oR 25x25 mm Height of running plates: 25mm < br> Total length of the knife: 150mm Interchangeable blades are marked WNM. 0804 ..(ie WNMA, WNMG, etc.) A key for exchanging the slice is supplied with the goods. It is an alternative to the PWLNL or DWLNL knife

SK washer for left turning lathe with code: JS_DKJNR_2020 and JS_DKJNR_2525 - see related products JS_DKJNL_2020 and JS_DKJNL_2525 - see related products Pile height: 4mm

Set of hexagon heads with 1/4 "square Material: chrome-vanadium Set includes: Ratchet 1/4" Short head SPLINE 3,2-4-4,5- 5-5,5-6-7-8-9-10-11-12-13-14mm Head Extension 50 and 150mm 1/4 " 4 " Extension for gola with handle