Interchangeable inserts

Internal replaceable blade thread insert 16 IR M ISO BMA Size : Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable cutting edge threaded insert 16 IL M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge) : 3.47mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

External replaceable blade thread insert 22 ER M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge): 4.71mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

External replaceable blade thread insert 22 EL M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: left Height (to edge): 4.71mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable blade thread insert 22 IR M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge): 4.71mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable cutting edge threaded insert 22 IL M ISO BMA Size: 22 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: left Height (to edge) : 4.71mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

External exchangeable cutting insert TN 11ERA60 - universal 60 Â ° Â ° Size: 11 Pitch: 0,5 - 1, 5 mm Height(after running): 3.47 mm Suitable for cutting external metric thread, pitch 0.5 - 1.5 mm Coating: PVD submicron TiN Sheet material: MXC Usage: Steel Stainless steel Cast iron Non-ferrous metals Heat-resistant steel Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). Contact the Company: Cat. A „. : 0020300053 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Inner Replacement Thread Insert TN 11IR19W Size: 11 Number of Inches per inch: 19 Height (by Cut): 3,2mm Suitable for cutting inner Inner Threaded Thread G Coating: PVD TiALN Uses: Steel: P20-P40 Stainless Steel Cast Iron: K20-K30 Heat Resistant Steel (Ni, Co, Fe, Ti) Hardened Steel Cutting Conditions see enclosed catalog, page 56 (sheet 60). Kat. No .:

Internal replaceable cutting edge thread insert 11 IR 20 UN BMA Size : 11 Number of strokes per inch : 20 Peak angle : 60° Height (to edge) : 3.2mm Suitable for cutting internal inch unified thread, pitch UN 20 z/1" - for example for threads: UNC 1/4"; UNF 7/16" ; UNF 1/2" ; UNEF 3/4" ; UNEF 13/16" ; UNEF 7/8" ; UNEF 15/16" ; UNEF 1" Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page No. 56(sheet No. 60). Cat. , if you want to buy the whole package, put 10 pcs.in the basket

Internal replaceable cutting edge thread insert 11 IR 24 UN BMA Size : 11 Number of strokes per inch : 24 Peak angle : 60° Height (to edge) : 3.2mm Suitable for cutting internal inch unified thread, pitch UN 24 z/1" - for example for threads: UNC no.10; UNC no.12; UNF 5/16"; UNF 3/8" ; UNEF 9/16" ; UNEF 5/8" ; UNEF 11/16" Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56(sheet no. 60). Cat. no.: 0020300293 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert with cutting edge 11 IR 28 UN BMA Size : 11 Number of strokes per inch : 28 Ape angle : 60° Height (to edge) : 3.2mm Suitable for cutting internal inch unified thread, pitch UN 28 z/1" - for example for threads: UNF no.12; UNF 1/4"; UNEF 7/16" ; UNEF 1/2" Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replaceable threaded insert TN 11IRA60 - universal 60 ° Size: 11 Pitch: 0.5 - 1.5 mm Height(about): 3,2mm Suitable for cutting internal metric thread, pitch 0,5 - 1, 5 mm Coating: PVD submicron TiN Sheet material: MXC Applications: Steel Stainless steel Cast iron Non-ferrous metals Heat-resistant steel Hardened steel For cross-cutting conditions, see the enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.