Interchangeable insert MGGN300-CM HRC55, Kovonastroje
Current price:
30,81 €
with VAT
25,46 € without VAT
In stock
(6x)
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000461022
- Warranty:
- 24 months
- Code:
- 01906300
Product information
Parting insert for hardened steel, replaceable insert, insert
MGGN300 CM HRC55
Suitable for up to 3mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders
Width: 3mm
Material: CBN(1x)
CBN coating: without coating
- Second side universal(steel stainless steel) - suitable for starting the groove
HRC55 Series:
Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting.
Application:
Cast iron: K05-K15
Carbide and hardened steels: H10-H25(45-65 HRC)
- the other side without CBN is suitable for steel and stainless steel
Cutting conditions(CBN):
Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm
Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm
Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm
Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm
Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm
The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.
Suitable for up to 3mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders
Width: 3mm
Material: CBN(1x)
CBN coating: without coating
- Second side universal(steel stainless steel) - suitable for starting the groove
HRC55 Series:
Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting.
Application:
Cast iron: K05-K15
Carbide and hardened steels: H10-H25(45-65 HRC)
- the other side without CBN is suitable for steel and stainless steel
Cutting conditions(CBN):
Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm
Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm
Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm
Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm
Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm
The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"levně, rychle, spolehlivě"
"vše OK"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!