Inside SDXCL turning holder , AKKO
| 12mm / DCMT 0702 |
On request
|
43,48 € with VAT |
| 16mm / DCMT 0702 |
On request
|
49,69 € with VAT |
| 16mm / DCMT 11T3 |
On request
|
49,69 € with VAT |
| 16mm / DCMT 0702 |
On request
|
52,18 € with VAT |
| 20mm / DCMT 11T3 |
On request
|
52,18 € with VAT |
| 25mm / DCMT 11T3 |
On request
|
69,56 € with VAT |
| 32mm / DCMT 11T3 |
On request
|
105,60 € with VAT |
| 40mm / DCMT 11T3 |
On request
|
156,53 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- AKKO
- Warranty:
- 24 months
Product information
Knife for internal turning
Clamping diameter: according to the selected variant
Marking of plates that fit into the holder: according to the selected variant (DCMT or DCGT)
Other dimensions - see the attached catalog sheet
The product comes with a key for changing the blade.
The plate is not part of the package, it can be purchased separately - see related products.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.
Variants
Accessories
-
Replaceable insert DCMT 070204-HMP PC9030, Tornado
Turning insert, replaceable insert for turning DCMT 070204 - HMP, PC9030 Radius 0,4mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 LamaÄ HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock6,07 € with VAT -
Replaceable insert DCGT 070204-AL H01, Kovonastroje
Turning insert VBD DCGT 070204 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 490-125m / min < br> fn = 0.02-0.30 mm / rev. ap = 0,1-4,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock5,98 € with VAT -
Replaceable insert DCMT 070204-HMP NC3120, Tornado
Turning insert, turning insert for turning DCMT 070204 - HMP, NC3120 Radius 0,4mm Material of blade: NC3120 HMP type: Medium to finishing geometry of the chipper for small chips. The wider wall of the trowel ensures extended plate life - even with sudden change in cutting depth.
In stock6,47 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!