Inside PTUNR turning holder , AKKO
Variant:
| 16mm / TNMG 1604 |
On request
|
83,24 € with VAT |
| 20mm / TNMG 1604 |
On request
|
86,96 € with VAT |
| 25mm / TNMG 1604 |
On request
|
100,62 € with VAT |
| 32mm / TNMG 1604 |
On request
|
124,23 € with VAT |
| 32mm / TNMG 2204 |
On request
|
124,23 € with VAT |
| 40mm / TNMG 1604 |
On request
|
162,73 € with VAT |
| 40mm / TNMG 2204 |
On request
|
162,73 € with VAT |
| 50mm / TNMG 2204 |
On request
|
196,27 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Warranty:
- 24 months
Product information
Right holder for exchangeable slices, clamping with the thumb and
via the clamp
Knife for internal turning
Clamping diameter: according to the selected variant
Designation of plates that fit into the holder: according to the selected variant (TNMG or TNMM or TNMA)
Other dimensions - see the attached catalog sheet
The product comes with a key for changing the slice.
The plate is not part of the package, it can be purchased separately - see related products.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.
Knife for internal turning
Clamping diameter: according to the selected variant
Designation of plates that fit into the holder: according to the selected variant (TNMG or TNMM or TNMA)
Other dimensions - see the attached catalog sheet
The product comes with a key for changing the slice.
The plate is not part of the package, it can be purchased separately - see related products.
General information on choosing a suitable holder:
Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality.
P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
"vše OK"
"Dobrá cena, vše ok."
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!