Inside MCLNR turning holder , AKKO

Double sided turning insert, replaceable, VBD CNMG 120408 E-KR Radius: 0,8mm Material of blade: T5315 Usage: Steel: P10-P25 Stainless Steel: M05-M15 Cast Iron: K10-K25 Cat. No. 80026193

Turning insert VBD CNMG 120404 TF IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 TF IC907 Radius 0,4mm Coating: PVD, TiAlN TiN IC907 Series: Hard sub-micron substrates TiAlN PVD coated. Suitable for low to medium cutting speeds. Developed for machining heat-resistant alloys, titanium, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20(not recommended it is suitable, more suitable type is CCGT -AS IC20) Superalloys: S05-S20 Carbides: H05-H15 Other conditions - see attached foto Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5592199 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 WG IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type WG: Wiper series - high-speed machining - fast feed - with very good quality of the resulting surface. Contact the Company: Kat. Ä. : 5550247 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CNMG 120408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Non Ferrous Metals & Plastics: N05-N20 Superslitz: S05-S20 Hardnesses: H05-H15 Conditions of use - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5591047

Turning insert VBD CNMG 120408 GN IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Application: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Special conditions - see appendix © photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507730 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD SNMG 120408E-R; 6630 Radius 0,8mm Slices design suitable for machining: steel, stainless steel, cast iron Material of the blade: 6630 Usage: Steel: P15-P35 Stainless Steel: M10-M30 Cast Iron: K20-K30 | code: 80000011

Turning insert VBD CNMG 120408 GN IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5509498 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CNMG 120408 PP IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Non Ferrous Metals & Plastics: N05-N20 Superslitz: S05-S20 Hardnesses: H05-H15 Conditions of use - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5591047

Double-sided turning insert, exchangable insert CNMG 120408 - HM NC3030 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Excellent stability under various grip conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Recommended feed: see attached PDF file or photo LamaÄ HM: Suitable for normal machining, for uninterrupted and interrupted ovanA1 A ™ ez. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 GN IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. no. : 3308132 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120404 VL IC806 Radius 0.4mm Coating: PVD - AlTiN "SUMO TEC" IC806 Series : Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 General conditions - see the attached photo Type VL : Breaker for machining refractory alloys and stainless steel valves Cat. no.: 5567594 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120408 VL IC806 Radius 0.8mm Coating: PVD - AlTiN "SUMO TEC" IC806 Series : Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 General conditions - see the attached photo Type VL : Breaker for machining refractory alloys and stainless steel valves Cat. no.: 5599908 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 ER Radius 0.8mm Insert design is suitable for machining: steel, stainless steel, cast iron Insert material: T9325 Application: Steel: P15-P35 Stainless steel: M10-M25 Cast iron: K20-K35 Ord. code: 80015661 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.50 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - MK NC6315 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC6315: Universal series for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: CVD - MT-TiCN Al2O3 Application: Cast iron: K10-K20 Refractory alloys: S15-S25 < br> LamaÄ MK: Suitable for uninterrupted cuts for ductile and gray cast iron during high-speed machining(high speed and feeds). Improved rigidity of the plate against breakage due to the flat shape of the breaker. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - HM PC5300 Radius 0.8 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40( hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 HM breaker: Suitable for common gears Â!R , intermittent and intermittent cutting. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120408 - B25 PC5300, KORLOY Radius 0.8mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, replaceable insert, insert CNMG 120404 - B25 PC5300, KORLOY Radius 0.4mm Length A ™ Cutting edges: 12.7mm Height: 4.76mm Clamping hole diameter: 5.16mm Clamping method: thumb Number of uses: 4 < br> Sheet material: PC5300: Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Breaker B25: Smooth universal breaker for normal machining. Long continuous chip. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Double-sided turning insert, insert, insert CNMG 120404 - HM NC3030 Radius 0.4 mm Cutting length edges: 12,7mm Height: 4,76mm Clamping hole diameter: 5,16mm Clamping method: thumb Number of uses: 4 Sheet material: NC3030 - Suitable for machining steels at medium to low speeds. Excellent wear resistance, chipping and high temperature stability due to Al2O3 coating. Excellent stability under various grip conditions. Coating: MT-CVD: TiCN TiC Al2O3 TiN Application: Steel: P25-P35 Stainless steel: M15-M25 Recommended feed: see attached PDF file or photo LamaÄ HM: Suitable for normal machining, for uninterrupted and interrupted ovanA1 A ™ ez. Suitable for high-speed machining, higher feeds, CNC machining. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-WG IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type WG : Suitable for high-feed machining, where a very smooth surface can be achieved. Ord. Ä. : 5550249 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404-TF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Application: Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type TF : Universal use under common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Ord. Ä. : 5507806 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 PP IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo PP type: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. Contact the Company: Kat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Usage: b> Roughing Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitin (Ni, Co, Fe, Ti): S20-S30 Kat. No. 80015657

CNMG 120408 ER - SI, Simplex Radius: 0,8mm Material of slicer: T9325 Usage: Roughing Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitin (Ni, Co, Fe, Ti): S20-S30 Kat. No. 80015664

VBD CNMG 120408 TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 TF: Universal use under normal cutting conditions . Kat. No .: 5598518