Insert for M12 tap with torque coupling, TC-820-M12-DIN376, 820-23D
M6 - DIN371 |
In stock
(2x)
|
50,01 € with VAT |
M8 - DIN371 |
In stock
(3x)
|
50,01 € with VAT |
M10 - DIN371 |
In stock
(7x)
|
50,01 € with VAT |
M8 - DIN376 |
In stock
(6x)
|
50,01 € with VAT |
M10 - DIN376 |
In stock
(30x)
|
50,01 € with VAT |
M12 - DIN376 |
In stock
(6x)
|
50,01 € with VAT |
M14 - DIN376 |
In stock
(9x)
|
50,01 € with VAT |
M16 - DIN376 |
In stock
(3x)
|
50,01 € with VAT |
M18 - DIN376 |
In stock
(7x)
|
50,01 € with VAT |
M20 - DIN376 |
In stock
(2x)
|
50,01 € with VAT |
M22 - DIN376 |
On request
|
50,01 € with VAT |
M24 - DIN376 |
In stock
(2x)
|
50,01 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000305449
- Brand:
- Vertex nebo jiný
- Warranty:
- 24 months
- Code:
- 3404-553
Product information
DIN 376 (Classic Shank) : M12
DIN 374 (classic shank): M12x1,5, M12x1,25, M12x1,0
DIN 371 (reinforced stopper): ---
Length compensation - see enclosed photo
Taper clamping method:
The taps are secured in the adapter by a square and a clamping shank.
The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension.
Function:
The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed.
This insert is threaded - see related products. Can not be used alone.
Variants
Accessories
-
Pneumatic tap M8-M16 with adjustable arm, VAT-716
Air die with adjustable arm Range: M8-M16 Speed: 230-250 rpm. / min. (clamping head VAT-SP16) Shoulder positioning: Rmax 700mm Contains 6 pcs of adapters TC-820 with torque coupling for taps: DIN371: M8, M10 DIN376: M10 , M12, M14, M16 , other adapters can be purchased - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Ref. No. 3404-412
On request2.126,67 € with VAT -
Pneumatic tap M10-M20 with adjustable arm, VAT-720
Air die with adjustable arm Range: M10-M20 Speed: 180-200 ot. / min. (clamping head VAT-SP20) Shoulder positioning: Rmax 700mm Contains 6 pcs of TC-820 adapter with torque coupling for taps: DIN371: M10 DIN376: M12, M14 , M16, M18, M20 , other adapters can be purchased - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Ref. No .: 3404-413
On request2.536,21 € with VAT -
Pneumatic tap M8-M16 with adjustable arm, VAT-1916
Air die with adjustable arm Range: M8-M16 Speed: 230-250 rpm. / min. (clamping head VAT-SP16) Shoulder positioning: Rmin. 200mm, Rmax 1900mm Contains 6 pcs of TC-820 adapters with torque coupling for taps: DIN371: M8, M10 DIN376: M10, M12, M14, M16 , other adapters are possible buy - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Angle head can be purchased for threading - see related products. Ref. No. 3404-427
On request2.843,02 € with VAT -
Pneumatic tap M10-M20 with adjustable arm, VAT-1920
Air die with adjustable arm Range: M10-M20 Speed: 180-200 ot. / min. (clamping head VAT-SP20) Shoulder positioning: Rmin. 200mm, Rmax 1900mm Contains 6 pcs of TC-820 adapters with torque coupling for taps: DIN371: M10 DIN376: M12, M14, M16, M18, M20 other adapters possible buy - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Angle head can be purchased for threading - see related products. Ref. No. 3404-430
On request3.215,82 € with VAT -
Pneumatic tap M8-M16 with adjustable arm, VAT-1616
Air die with adjustable arm Range: M8-M16 Speed: 230-250 rpm. / min. (clamping head VAT-SP16) Shoulder positioning: Rmin. 500mm, Rmax 1600mm Contains 6 pcs of TC-820 adapter with torque coupling for taps: DIN371: M8, M10 DIN376: M10, M12, M14, M16 , other adapters are possible buy - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Angle head can be purchased for threading - see related products. Ref. No. 3404-422
On request2.209,27 € with VAT -
Pneumatic tap M10-M20 with adjustable arm, VAT-1620
Air die with adjustable arm Range: M10-M20 Speed: 180-200 ot. / min. (clamping head VAT-SP20) Shoulder positioning: Rmin. 500mm, Rmax 1600mm Contains 6 pcs of TC-820 adapter with torque coupling for taps: DIN371: M10 DIN376: M12, M14, M16, M18, M20 other adapters possible buy - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Angle head can be purchased for threading - see related products. Ref. No. 3404-428
On request2.637,90 € with VAT -
Pneumatic tap M8-M16 with adjustable arm, VAT-1416
Air die with adjustable arm Range: M8-M16 Speed: 230-250 rpm. / min. (clamping head VAT-SP16) Shoulder positioning: Rmin. 200mm, Rmax 1400mm Contains 6 pcs of TC-820 adapters with torque coupling for taps: DIN371: M8, M10 DIN376: M10, M12, M14, M16 , other adapters are possible buy - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Angle head can be purchased for threading - see related products. Ref. No. 3404-417
On request2.457,27 € with VAT -
Pneumatic tap M10-M20 with adjustable arm, VAT-1420
Air die with adjustable arm Range: M10-M20 Speed: 180-200 ot. / min. (clamping head VAT-SP20) Shoulder positioning: Rmin. 200mm, Rmax 1400mm Contains 6 pcs of TC-820 adapter with torque coupling for taps: DIN371: M10 DIN376: M12, M14, M16, M18, M20 other adapters are possible buy - see related products. Contains air pressure regulator with separator and lubricator. Clamping cast iron plate not included! Angle head can be purchased for threading - see related products. Ref. No .: 3404-418
On request2.876,78 € with VAT -
Tapping head ISO40 DIN69871 for TC-820 extensions with length compensation , SK40-WF20
Clamping range: M6 - M24 Clamping shank: DIN ISO40 steep taper Length from spindle: 80mm < Tape clamping method: The taps are secured by a square and a shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Extensions are secured in the head via a bearing and stones - see photo Extension extension - see photo Extensions and taps are not a part of the set! Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. Screwdriver has a length compensation of approx. 0.5cm, so it is sufficient to programmatically adjust the cutting depth. The torque clutch eventually prevents the tilting of the tap.
In stock190,83 € with VAT -
ISO40 tap for TC-820 collets with length compensation, BT40-WF20
Clamping range: M6 - M24 Clamping shank: BT ISO40 sharp cone Length from spindle: 80mm < br> Standard: JIS 6339 MAS ??BT 40 the attachments are secured behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Extensions are secured in the head via a bearing and stones - see photo (photo is for DIN69871) Extension extension - see photo (photo is for DIN69871) Extensions and taps are not part of the set! Function: The tap is clamped into a suitable TC820 collet which has a pre-set torque clutch or possibly fine-tune it as needed. Screwdriver has a length compensation of approx. 0.5cm, so it is sufficient to programmatically adjust the cutting depth. The torque clutch eventually prevents the tilting of the tap.
In stock185,26 € with VAT -
MK3 tap for TC-820 collets with length compensation, MT3-WF20
Quick-acting tapping head with length compensation for TC 820 for machine taps according to DIN371 DIN374 and DIN376 Torque coupling is set directly on the collet. Clamping range: M6 - M24 (need to buy TC820 collet) Clamping shank: Morse 3 / MK3 with carrier Tape clamping method: Taps are clamped into the TC820 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC820 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed.
On request168,37 € with VAT -
MK4 tap for TC-820 collets with length compensation, MT4-WF20
Quick-acting tapping head with length compensation for TC 820 for machine taps according to DIN371 DIN374 and DIN376 Torque coupling is set directly on the collet. Clamping range: M6 - M24 (need to buy TC820 collet) Clamping shank: morse 4 / MK4 with carrier Thread clamping method: Taps are clamped into the TC820 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC820 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed.
In stock244,34 € with VAT -
MK4 tap for TC-820, MT4-SF20 collets
Screwdriver head for TC 820 for machine taps according to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque clutch is set directly on the collet. Clamping range: M6 - M24 (need to buy TC820 collet) Clamping shank: morse 4 / MK4 with carrier Thread clamping method: Taps are clamped into the TC820 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC820 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed.
In stock84,05 € with VAT -
MK3 tap for TC-820, MT3-SF20 collets
Screwdriver head for TC 820 for machine taps according to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque clutch is set directly on the collet. Clamping range: M6 - M24 (need to buy TC820 collet) Clamping shank: Morse 3 / MK3 with carrier Tape clamping method: Taps are clamped into the TC820 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC820 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed.
On request90,21 € with VAT -
Tapping head ISO50 DIN69871 for TC-820 extensions with length compensation , SK50-WF20
Clamping tapping head with length compensation for TC 820 attachments with torque coupling for machine taps Clamping range: M6 - M24 Clamping shank: steep taper DIN ISO50 Length from spindle: 80mm Standard: DIN69871 50 Length compensation - see photo Clamping method vitník: The taps are secured in the attachment by four edges and a clamping shank. The tap is held firmly in the attachment, pulled out after locking the clamping ring at the front of the attachment. Attachments are in the main body over the bearing and stones - see photo Extending the attachment - see photo Attachments and taps are not part of the set! Functions: The tap is clamped in a suitable collet TC820, which has a torque clutch already preset, or it can be fine-tuned as needed. The tap has a length compensation of approx. 0.5 cm, so it is sufficient to program the cutting depth. Torque clutch may prevent the tap from bending.
In stock271,50 € with VAT -
HSK A63 thread cutter for TC-820 collets with length compensation, HSK63A-WF20
Quick-action threading head with length compensation for TC 820 attachments with torque coupling for machine taps Clamping range: M6 - M24 Clamping shank: HSK 63A Length from spindle: 105mm Standard: DIN 69893 - HSK-A63 Length compensation - see photo Method of clamping the tap: The taps are secured in the extension by the square and the clamping shank. The tap is firmly held in the extension, pulled out after pressing the clamping collar in the front of the extension. The attachments are secured in the head via the bearing and stones The attachments and taps are not part of the set! Functions: The tap is clamped in a suitable collet TC820, which has a torque coupling already preset, or it can be fine-tuned as needed. The thread cutter has a length compensation of approx. 0.5 cm, so it is enough to program the appropriate cutting depth. The torque coupling prevents the tap from twisting.
In stock169,63 € with VAT -
Thread cutter M8-M20, ISO 40 with length compensation for TC-820 with torque coupling, VQT
norms: DIN69871 Adapters in set of taps: DIN 371 (reinforced stopper): M8; M10; DIN 376 (classical shank): M12; M14; M16; M18; M20 Length compensation - see photo no.3, no.4 and no.12 The set is delivered in the trunk - see photo 9 and no.10 Taper clamping method: The taps are secured in the extension behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Extensions are secured in the head via a bearing and stones - see photo no.5 and no.6 Extension of the extension see photo no.7 and no.8 You can buy the set Taps for M5 - M24 taps - see photo n ° 11 Taps for taps manufactured in accordance with JIS and ISO 529, which are not common in our country, can also be purchased for the die head. Approximately 90% of the domestic market consists of taps made according to DIN standards Taps are not a part of the set!
In stock614,27 € with VAT -
NC 20mm tap for TC-820 collets with length compensation, ST20-WF20
Home Quick die head with a length compensation for the extension TC 820 for machine taps according DIN371 DIN374 and DIN376 threading Clamping range: M5 - M24 (to buy a separate collet TC820) Home Shank: 20mm cylindrical < Clamping Shank Length: 70mm Tapping Method: Taps are clamped into the TC820 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC820 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC820 collet, which has a torque clutch already preset, or it can be fine-tuned as needed. The screwdriver has a length compensation of approx. 1.0cm, so it is sufficient to programmatically adjust the cutting depth. The torque clutch eventually prevents the tilting of the tap.
In stock221,95 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!