Individual sets (1 size)

V-Coil kit for repairing pipe G / BSP thread Dimension and pitch: according to the selected variant Contents of the set: according to the selected variant, see the attached catalog sheet for details The lengths of the inserts are always a multiple of the nominal diameter of the thread being repaired, i.e. for example if you are repairing a G1/4" thread and the set includes 1.5D inserts, then the length of the insert is 1.5 times 1/ 4" (=6.35mm), i.e. 9.525mm. The lengths of the inserts are always a multiple of the nominal size of the thread being repaired. Drill is not part of the set Thread repair method: 1. You drill out the damaged thread with the provided drill bit (if it is included in the set) 2. You cut the thread with the attached (special) tapper (the use of other - set or machine tappers does not work) 3. With the help of the supplied inserter, insert the insert to the desired depth (beware, the inserts cannot be turned back!) 4. Use a punch (if included in the set) or pliers to break out the insertion part on the insert