Hydraulic vices

Branded machine vice with wheel drive and hydraulic pressure. Width of the jaws: according to the selected variant Other dimensions - see attached photos or product description for individual variants. The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Machine vise with hydraulic pressure Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The wedge mechanism of the jaws pushes the clamped workpiece down - the jaws do not "lift"!!! Accuracy up to 0.01mm The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. The vise bed is hardened to 45 HRC Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Guide stones and clamping screws are not part of the package.

Rotating tiltable machine vice with tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description of the individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Rotating tilting machine vice with lateral tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Branded CNC machine vise with hydraulic pressure. Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The opening can be adjusted using a pin to 4 positions - see the attached catalog sheet The clamping stop (clamping force) can be adjusted - there is a ring with a scale on the handle, which can be pushed against the vise by loosening two Allen screws and thus always achieve a constant tightening force for all workpieces. We recommend purchasing a pressure gauge with the vise, thanks to which you can always adjust the clamping force as needed. The screw is encapsulated -> protection against dust, chips and dirt. The vise bed is open. The body is made of high-quality and highly resistant ductile cast iron FCD60 Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Clamps (4 pcs), guide stones (2 pcs), handle are also part of the delivery.

Branded CNC machine vise with improved hydraulic transmission Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants There is a tightening scale (3 degrees) on the shaft near the booster. Hydraulic transmission can be switched off and tightened manually without it. Just disconnect the nut - see the attached photo. Compared to the VNC series of vices, the VMC type has higher rigidity, the bed is covered from above and from the handle - it prevents chips from getting inside. Vise height guarantee. The mechanism pulls the jaw down when tightening. The screw is encapsulated -> protection against dust, chips and dirt. The body is made of high-quality and highly resistant ductile cast iron FCD60 Bearing surface for workpiece hardened > 45 HRC. Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Clamps (4 pcs), guide stones (2 pcs), handle are also part of the delivery.

Machine vice type MC with mechanical booster, suitable for MC / NC machines Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The screw is encapsulated -> protection of the screw against the ingress of dust, chips and dirt. Guarantee height of vices within 0.02mm tolerance The mechanism pulls the jaw down when tightening. The body is made of high-quality and highly resistant ductile cast iron FCD60 Bearing surface for workpiece hardened > 45 HRC. Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm Clamps (4 pcs), guide stones (2 pcs), handle and transport eyes (2 pcs) are also part of the delivery. It is possible to purchase soft and hard jaws for the vise - see attached catalog.

Machine hydraulic vice type MC with hydraulic booster, suitable for MC / NC machines Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The screw is encapsulated -> protection of the screw against the ingress of dust, chips and dirt. Guarantee height of vices within 0.02mm tolerance The mechanism pulls the jaw down when tightening. The body is made of high-quality and highly resistant ductile cast iron FCD60 Bearing surface for workpiece hardened > 45 HRC. Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm Clamps (4 pcs), guide stones (2 pcs), handle and transport eyes (2 pcs) are also part of the delivery. It is possible to purchase soft and hard jaws for the vise - see attached catalog. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Machine right hydraulic vice type MC, suitable for MC / NC machines, with prismatic jaw Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants Vise for vertical clamping of the workpiece The vise has a ground seating surface with a groove for guide stones on the side. The screw is encapsulated -> protection of the screw against the ingress of dust, chips and dirt. Guarantee height of vices within 0.02mm tolerance The mechanism pulls the jaw down when tightening. The body is made of high-quality and highly resistant ductile cast iron FCD60 Bearing surface for workpiece hardened > 45 HRC. Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm Clamps (4 pcs), guide stones (2 pcs), handle and transport eyes (2 pcs) are also part of the delivery. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Machine hydraulic vice type MC with hydraulic booster, suitable for MC / NC machines Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The vise has 3 adjustable tightening stages. The screw is encapsulated -> protection of the screw against the ingress of dust, chips and dirt. Guarantee height of vices within 0.02mm tolerance The mechanism pulls the jaw down when tightening. The body is made of high-quality and highly resistant ductile cast iron FCD60 Bearing surface for workpiece hardened > 45 HRC. Parallelism of the seating surface and the bottom of the vice: 0.01 mm / 100 mm Rectangularity of the seating surface with jaws: 0.02 mm / 100 mm Parallelism of the bearing surface with the workpiece: 0.02 mm / 100 mm Clamps (4 pcs), guide stones (2 pcs), handle and transport eyes (2 pcs) are also part of the delivery. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Locking pin for sliding jaw - for vice VNC-160H Position: No.6 Diameter of pin: 20mm Diameter: 22mm Diameter: 17mm Total length: 150mm If you have bent this pin, it is because the vise has been pulled above the maximum permissible tightening force. We recommend purchasing a pressure gauge for the vise and setting the vise stop to the maximum permitted tightening force. Attention - this bolt was made in the Czech Republic from quality steel - it is not an original manufacturer's bolt. It is quite probable that if you continue to pull the vise, you will not bend this pin anymore = it can loosen the vice and damage something else. © ho.

Set of smooth / clean jaws for machine vice VNC-160H Dimensions - see enclosed catalog sheet. Broušeno, kaleno. Ref. No. 4005-123