HSS right

Right-handed blackened passivated twist drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Drilling depth: 5xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: CSN 22 1121, DIN338RN / DIN 338 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, steel casting with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

Right-handed ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - lengths see attached photo Edge angle: 118 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: General - hand, stand, column drills Non-alloy and alloy steel, cast steel with strength up to 900 N / mm2 Gray malleable cast irons, ductile cast irons, sintered aluminum alloys, bronze

Coated right-cut ground twist drill for steel with reinforced core and cylindrical shank Drill length: Classic short series - see attached photo for lengths Blade angle: 118° Helix angle: 25-30° Material: HSS - High-speed steel Coating: TiN - Titanium Nitride Standard: DIN338 (replaces PN 2907 / PN2907) Usage : General - hand, stand, column drills Unalloyed and alloyed steel, cast steel with a strength of up to 900 N/mm2 Gray malleable cast irons, sintered ductile irons, short chip aluminum alloys, bronze

Multi-purpose right-cut ground twist drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: according to the selected variant Drill length: Short series - see attached photo for lengths The graduated tip is from a diameter of 2.5 mm From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 (replaces PN 2907 / PN2907) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages : Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 4.5mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multi-purpose right-hand ground spiral drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: 5.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 11.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Thread Repair Kit M10 (M10x1,25) mm / Thread Repair Gradient: 1,25 - Fine Gradient 1pcs - HSS Grinded Drill & Special Tapper 1pcs Inserts Lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert