Holders and clamps

Product count: 11

Order by:

Products per page:

Clamping head with Morse taper for core drills, Karnasch

Clamp - holder for Karnasch core drills, screw type Morse taper: according to the selected variant For clamping shanks: according to the selected variant The drill is clamped in the head over screws. Without internal cooling

from 51,43 € with VAT

Choose variant
Morse taper drive head for core drills with cooling, Karnasch

Clamp - holder for Karnasch core drills, screw type with internal cooling Morse cone: according to the selected variant For clamping shanks: according to the selected variant Length of the clamping device: according to the selected variant The drill is clamped in the head via screws. With internal cooling

from 106,73 € with VAT

Choose variant
Morse taper head for Quick-Change core drills, Karnasch

Quick-release chuck - holder for Karnasch core drills, quick-change design Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) Without internal cooling

from 107,27 € with VAT

Choose variant
Morse taper head for Quick-Change core drills with cooling, Karnasch

Quick-release chuck - holder for Karnasch core drills, quick-change design with internal cooling Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) With internal cooling

from 136,16 € with VAT

Choose variant
JAL clamping holder with Morse taper, ČSN 241491

Clamping collet chuck with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note: * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1491 Usage: Drill or lathe - for clamping drills and other tools with a cylindrical shank This is an old Czech design. We recommend switching to ER collets and ER collets.

from 42,13 € with VAT

Choose variant
Drive head MK3 for core drills, Karnasch

Karnasch Core Clamp Clamp Morse Cone: MK3 Clamping Shanks: 3/4 "(19.05mm) No Internal Cooling

In stock

61,46 € with VAT
Spring for driving heads for core drills, Karnasch

Carrier spring for core drills Size: 13x135mm Suitable for use with drive heads: 20.1293, 20.1286, 20.1310 , 20.1844 -

In stock

4,27 € with VAT
Reduction 19mm(3/4 ") for core drills - with cone B16, Karnasch

Adapter for weldon 3/4 "- for clamping classic drill chucks Application: For core drills with 3/4"(19,05mm) weldon chucks Drill chucks can be found - see related products

In stock

16,84 € with VAT
Reduction from 19mm to 32mm(3/4 "to 1 1/4"), Karnasch

Thanks to this reduction, you can clamp larger drill diameters on a magnetic drill with weldon clamping 19mm(3/4 ") - with 32mm clamping 281 1/4") The reduction has a 7.98mm bore

In stock

24,03 € with VAT
Extension 100mm for 19mm (3/4") core drills, Karnasch

Extension for drilling with core drills in greater depth Use: For core drills with 3/4" (19.05mm) weldon clamping ( or Nitto clamping) Drill chucks can be found - see related products

In stock

35,90 € with VAT
Adapter Weldon 32mm to 19mm, Karnasch

Adapter Weldon. Outer dimension 32mm, inner dimension 19mm

In stock

19,95 € with VAT