Hardness testers

Portable digital hardness tester - Rockwell, Brinell, Vickers, MPa - with fast measurement (2s) with data output via USB cable, dust and water resistant Scale: HRC , HV , HB , HRC , MPa Measuring ranges : HV : 100-940 (resolution 1HV) HB : 80-650 (resolution 1HB) HRC : 20-70 (resolution 0.1 HRC) MPa: 370-1740 (resolution 1MPa) Measurement accuracy: HB/HV: up to 3%, HRC up to 1.5% Small puncture tip. The test force and time do not depend on the operator of the measurement, the measurement takes only 2s. Memory: 1024 records Working temperature: -20°C to 40°C The part includes a type A probe with a testing force of 50N for general measurements. Max. roughness of the measured surface: Ra 2.5um Min. weight of the measured object: 0.1kg Min. thickness of the measured object: 0.1kg Min. radius of the measured object: 5mm Min. thickness of hardened surface layer: 0.1mm Min. diameter of the measuring area: 1mm - It is possible to purchase a type B (ISHU-460-B) probe for the hardness tester, which is suitable for hardened materials (force 10N, Max. surface roughness 1.5um and min. thickness of hardened layer 0.03mm). Package includes probe type A, 2x batteries, charger, USB cable and software

Rockwell ISH-MRD200 Universal Digital Hardness Tester Type: Digital Scales: HRA, HRB, HRC, HRD, HRF, HRG * next after purchase of tips it is possible to HRE , HRH and HRK) Resolution: 0,1HR Max. height of the tested object: 170mm Max. diameter of test item: 165mm Test force: 588N, 980N, 1471N Accessories: 1x test run for pr. 60mm 1x test rod for dia.150mm 1x V-prism 1x touch - diamond cone 120 ° 6x touch - ball 1 / 16A c € A “ 1x set standard HRB 88 A c € â € o95, HRC 60 A c €⠀ o 65, HRC 20 A c € â € o 30 1x dust cover 1x USB cable and software 1x 230V power cable; 50 / 60Hz Possibility of transfer to PC wirelessly or via USB. Load-up mode: automatic Display power: built-in rechargeable battery Dimensions(W x D x H): 160 x 520 x 700 mm Hardness tester weight: 60kg Optional for hardness tester: Wireless printer ISH-DS-PRINTER Carbide ball contact 3,175mm ISH-EHK-INDENTER Test standard HRB88-95 - ISH-BHRB Test standard HRC60-65 - ISH-BHRC3 Test standard HRC20-30 - ISH-BHRC1 Washer with V-prism for rollers with a diameter of 2-4mm - ISH-SMALLANVIL

ISH-SPHA Portable Digital Hardness Tester Type: Digital Scales: Leeb(HL), Vickers(HV), Brinell(HB), Rockwell(HRC HRB)) , Shore(HS) and measurement of strength(tensile length) in MPa Resolution: 1HL, 1HV, 1HB, 0,1HRC, 0,1HRB, HS, 1MPa Accuracy: -6HL(at HL = 800) Data output: bluetooth and USB Power supply: built-in rechargeable battery Accessories: 1x display unit 1x Touch - type D 1x printer 1x Test block - type D 1x Support ring 1x cleaning brush 1x Power cable 1x USB cable and photware 1x stylus for touch screen Possibility of transfer to PC wirelessly â € oOr via USB. Dimensions(W x D x H): 83 x 24 x 135 mm Hardness tester weight: 350g For hardness tester you can buy: Touch type DC: ISH-SPHA-DC Touch type C: ISH-SPHA-C Touch type D 15: ISH-SPHA-D15 Touch type DL: ISH-SPHA -DL < br> Touch type G: ISH-SPHA-G Test block type D: ISH-BHLD Test block type G: ISH-BHLG Connecting cable: ISH-COUPLANT Support rings

Analogue tester / shore meter / hardness soft rubber / rubber soft foam, soft foam elastomers, polystyrene and urethane foams, textile windings, pottery, shoes etc. Hardness measurement range: 20 - 100 Shore C Resistance: 1 Shore Type C: Hardened touch of diameter 5mm, with extended support base 30mm diameter Ball design - suitable where you do not want to leave a trace of measurement.

Hardness Measurement Range: 20 - 100 Shore D Power (Resistance Used to Measure): 44.64 N Dimensions: 110x38x50mm Accuracy: 1 Shore Type D: Hardened touch 1.1 to 1.4mm in diameter, 30 ° tip to tip with radius 0.1mm

Universal hardness tester HRBV 187,5 - Brinell, Rockwell, Vickers, also usable for measuring of thin sheets Type: Analog Range: 4-450HBS, 4-650HBW, 20-88HRA, 20- 100HRB, 20-70HRC, 200-1000HV Resolution: 0.5HR Max. test item height: 200mm Max. diameter of test item: 160mm Test load: 30kg / 31,25kg / 60kg / 62,5kg / 100kg / 150kg / 187,5kg Testing force: 294,2N, 306,5N, 588,4N , 612,9N, 980,7N, 1471,18N Accessories: 1x test tower dia. 62mm 1x test bench 150mm 1x prism 1x touch - diamond cone 120 ° 1x touch - diamond needle 136 ° 2x touch - steel ball 1,588mm 2x touch - steel ball 2,5mm 2x touch - steel ball 5,0mm 1x microscopic magnifying glass JC5 (2x / 40x) 1x set of standards HBS 150-250, HRA 80 - 88, HRB 85 - 95, HRC 60-70, HRC 35-55, HRC 20-30, HV 400-500 Power supply: 220V, 50Hz Dimensions (W x H x D): 200 x 465 x 760 mm Weight: 105kg with wrapper / 90kg without packaging

Universal Analog Hardness Tester HR150A - Rockwell Analog Type: Analog Range: 20-88HRA, 20-100HRB, 20-70HRC Resolution: 0.5HR Max . test item height: 170mm Max. Average test item: 135mm Test load: 60kg / 100kg / 150kg (initial load 10kg) Testing force: 588,4N, 980,7N, 1471N 1 test bench 62mm HRA 80 - 95, HRC 60 - 70, HRC 35 - 55, HRA 20 - 30. Dimensions (W x H x D): 180 x 465 x 630 mm Weight: 90kg with packaging / 60kg without packaging

Ball tip - ball for hardness tester HR-150A Clamping diameter: 6,35mm(1/4 ") with screw tightening surface Dmax: 10mm(8mm) Length clamping shanks: 11mm Overall length: 25mm