Hard outer jaw OJS 200/3 for self-centering universal chuck KUS, Kovonastroje

Dimensions & Parameters - See enclosed PDF Precision, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions. Including two sets of Allen screws for rear fastening (M1) and for clamping from the front (M2). Suitable for grinders, dividers, rotary tables etc.

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 200 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.

HardLine Series has locally grooved guide grooves for pinion mounting Diameter: 200 mm > Clamping: M1 Other Dimensions and Parameters - See Attached PDF Accuracy, Angling - See Attached PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.

Three-Turn Turning Chuck / Universal with Outer Sets OJS and Internal IJS Jaws and Loop, with Short Cone Type D - Camlock Pins - ČSN 243830 Diameter: 200 mm Clamping: D5 Camlock Other dimensions and parameters - see enclosed PDF Accuracy, run-in - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a wooden toy with Czech instructions. Suitable for eg lathes with camlock DIN ISO 702-2, eg OPTIturn TH 3610, OPTIturn TH 4010 and others

Dimensions & Parameters - See enclosed PDF Accuracy, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.