Hand tools
-
-
Keys, wounds and sets of keys
-
Bits and bit holders
-
Pliers, wrenches and sheet metal shears
-
Our TONA Expert
-
Screwdrivers
-
Brushes, files and rasps
-
Boxes and gills
-
Hammers, axes and saws
-
Punches, lengths, ejectors
-
Clamps
-
Magnets and magnetic collectors
-
The rest
-
Side riveting pliers 2 in 1 for rivets and nuts with 360°. head, FORTUM
2 in 1 professional side riveting pliers for rivets and rivet nuts For rivets: 2.4 - 3.2 - 4.0 - 4.8 mm For rivet nuts: M3-M4-M5-M6 Length: 200 mm Material: Cr-MoV Suitable for working in confined spaces. Supplied in a plastic case.
In stock39,30 € with VAT -
Front riveting pliers 3 in 1 for rivets, nuts and screws, FORTUM
3 in 1 professional face riveting pliers for rivets, rivet nuts and rivet screws For rivets: 2.4 - 3.2 - 4.0 - 4.8 - 6.4mm For rivet nuts: M3-M4-M5-M6-M8-M10 For rivet screws: M4-M5-M6-M8 Length: 325 mm Material: Cr-MoV Supplied in a plastic case.
In stock66,54 € with VAT -
Riveting attachment for a drill for rivet nuts, FORTUM
Reinforced T attachment, which allows you to rivet rivet nuts with the help of a drill. For rivet nuts: M3-M12, or M3-M4-M5-M6-M8-M10-M12 made of Al, copper, steel, stainless steel - Maximum length of rivet nut: 12mm Recommended working speed for optimal performance: < 20min-1 Hexagon for clamping in the drill: 8mm For work, it is possible to use tools with the required torque, e.g. cordless screwdriver, electric a 230V drill or a pneumatic drill in the range of 2Nm to 22Nm ( depending on the size and material of the rivet used). Material: CrMoV This adapter must not be used with any type of (impact) impact wrench, must not be used together with an impact function!
In stock96,69 € with VAT -
Riveting attachment for a drill for classic rivets and rivet nuts, FORTUM
Reinforced T-COMBO attachment, which allows riveting rivets and rivet nuts with the help of a drill. For rivet nuts: M3-M12, or M3-M4-M5-M6-M8-M10-M12 from material Al, copper, steel, stainless steel For burst rivets: 2.4-6.4mm, or 2.4-3.2-4.0-4.8-6.0-6.4mm from Al, copper, steel, stainless steel * Maximum length of rivet / rivet nut: 12mm Recommended working speed for optimal performance: < 20 min-1 Hexagon for clamping in the drill: 8mm For work, it is possible to use tools with the required torque, e.g. cordless screwdriver, electric a 230V drill or a pneumatic drill in the range of 2Nm to 22Nm (depending on the size and material of the rivet used). The riveting attachment of the T-COMBO set is basically ready for working with rivet nuts (nut rivets), because it has a nut work module installed from the factory. To work with burst rivets, it is necessary to replace this module and mount a working module intended for burst rivets (included in the delivery) in the extension. The replacement procedure is given in the attached instructions. Material: CrMoV This adapter must not be used with any type of impact wrench, must not be used together with the impact function!
On request116,10 € with VAT