Hand tools
-
-
Keys, wounds and sets of keys
-
Bits and bit holders
-
Pliers, wrenches and sheet metal shears
-
Our TONA Expert
-
Screwdrivers
-
Brushes, files and rasps
-
Boxes and gills
-
Hammers, axes and saws
-
Punches, lengths, ejectors
-
Clamps
-
Magnets and magnetic collectors
-
The rest
-
Workshop file 150mm flat 16x4, 150/1 - SEK 1, BAHCO
Flat file 150/1, 16x4,0 mm Length: 150 mm Width: 16mm Thickness: 4mm Sec: 1 - tj. semi-rough - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-06-1-2
In stock8,20 € with VAT -
Workshop file 150mm flat 16x4, 150/2 - SEK 2, BAHCO
Flat file 150/2, 16x4,0 mm Length: 150 mm Width: 16mm Thickness: 4mm Sec: 2 - ie. medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-06-2-2
In stock11,11 € with VAT -
Workshop file 150mm flat 16x4, 150/3 - SEK 3, BAHCO
Flat file 150/3, 16x4,0 mm Length: 150 mm Width: 16mm Thickness: 4mm Sec: 3 - ie. fine - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-06-3-2
In stock11,30 € with VAT -
Workshop file 200mm flat 20x5, 200/1 - SEK 1, BAHCO
Flat file 200/1, 20x5,0 mm Length: 200 mm Width: 20mm Thickness: 5mm Sec: 1 - ie. semi-rough - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-08-1-2
In stock12,41 € with VAT -
Workshop file 200mm flat 20x5, 200/2 - SEK 2, BAHCO
Flat file 200/2, 20x5,0 mm Length: 200 mm Width: 20mm Thickness: 5mm Sec: 2 - ie. medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-08-2-2
In stock12,83 € with VAT -
Workshop file 200mm flat 20x5, 200/3 - SEK 3, BAHCO
Flat file 200/3, 20x5,0 mm Length: 200 mm Width: 20mm Thickness: 5mm Sec: 3 - ie. fine - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-08-3-2
In stock12,83 € with VAT -
Workshop file 250mm flat 25x5,5, 250/1 - SEK 1, BAHCO
Flat file 250/1, 25x5,5 mm Length: 250 mm Width: 25mm Thickness: 5,5mm Sec: 1 - ie semi-coarse - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-10-1-2
In stock14,96 € with VAT -
Workshop file 250mm flat 25x5,5, 250/2 - SEK 2, BAHCO
Flat file 250/2, 25x5,5 mm Length: 250 mm Width: 25mm Thickness: 5,5mm Sec: 2 - ie medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-10-2-2
In stock15,21 € with VAT -
Workshop file 250mm flat 25x5,5, 250/3 - SEK 3, BAHCO
Flat file 250/3, 25x5,5 mm Length: 250 mm Width: 25mm Thickness: 5,5mm Sec: 3 - ie fine - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-10-3-2
In stock12,79 € with VAT -
Workshop file 300mm flat 30x6, 300/1 - SEK 1, BAHCO
Flat file 300/1, 30x6,0 mm Length: 300 mm Width: 30mm Thickness: 6mm Sec: 1 - tj. semi-coarse - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-12-1-2
In stock16,82 € with VAT -
Workshop file 300mm flat 30x6, 300/2 - SEK 2, BAHCO
Flat file 300/2, 30x6,0 mm Length: 300 mm Width: 30mm Thickness: 6mm Sec: 2 - ie. medium roughness - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-12-2-2
In stock17,11 € with VAT -
Workshop file 300mm flat 30x6, 300/3 - SEK 3, BAHCO
Flat file 300/3, 30x6,0 mm Length: 300 mm Width: 30mm Thickness: 6mm Sec: 3 - ie. fine - see attached table Heat treated to hardness: 65 - 69 HRC One side is smooth, the other side is with a simple cut. The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Used for sawing high-alloy tool steels and for sharpening heavy tools. Ord. Number: 1-100-12-3-2
In stock17,16 € with VAT