Hand tools

Folding calibrated torque wrench Range: 42-210 Nm Square 1/2 "Wrench length: 485mm Package includes: Wrench, instructions and declaration of conformity with measured values(protocol of measurement) from the manufacturer The key transfer meets the requirements of the ISO 6789-1: 2017 standard This is a so-called bending torque wrench - this means that after reaching the preset tightening torque to the spring of the head, which is accompanied by a characteristic click. There is a clear scale on the body of the wrench and then its fine division on the handle. the key is always only tightened, never allowed!

Folding calibrated torque wrench Range: 70-345 Nm Square 1/2 "Wrench length: 660mm Package includes: Wrench, instructions and declaration of conformity with measured values(protocol of measurement) from the manufacturer The key transfer meets the requirements of the ISO 6789-1: 2017 standard This is a so-called bending torque wrench - this means that after reaching the preset tightening torque to the spring of the head, which is accompanied by a characteristic click. There is a clear scale on the body of the wrench and then its fine division on the handle. the key is always only tightened, never allowed!

Folding calibrated torque wrench Range: 65-450 Nm Square 3/4 "Wrench length: 880mm Package includes: Wrench, instructions and declaration of conformity with measured values(protocol of measurement) from the manufacturer The key transfer meets the requirements of the ISO 6789-1: 2017 standard This is a so-called bending torque wrench - this means that after reaching the preset tightening torque to the spring of the head, which is accompanied by a characteristic click. There is a clear scale on the body of the wrench and then its fine division on the handle. the key is always only tightened, never allowed!

Folding calibrated torque wrench Range: 140-700 Nm Square 3/4 "Wrench length: 1300mm Package includes: Wrench, instructions and declaration of conformity with measured values(protocol of measurement) from the manufacturer The key transfer meets the requirements of the ISO 6789-1: 2017 standard This is a so-called bending torque wrench - this means that after reaching the preset tightening torque to the spring of the head, which is accompanied by a characteristic click. There is a clear scale on the body of the wrench and then its fine division on the handle. the key is always only tightened, never allowed!

Folding calibrated torque wrench Range: 140-980 Nm Square 3/4 "Wrench length: 1300mm Package includes: Wrench, instructions and declaration of conformity with measured values(protocol of measurement) from the manufacturer The key transfer meets the requirements of the ISO 6789-1: 2017 standard This is a so-called bending torque wrench - this means that after reaching the preset tightening torque to the spring of the head, which is accompanied by a characteristic click. There is a clear scale on the body of the wrench and then its fine division on the handle. the key is always only tightened, never allowed!

Bimetal / Hexagonal 3/8 "Hexagonal Bearing Bearing For Hexagonal Bits 10mm Square: 3/8" Material: Cr-V, Chrom-Vanadium

Extension for GOLA 1/2 "Heads Overall Length: 50mm Material: Cr-V, ie Chrome-Vanadium

Socket and bits set in 1/4 "and 1/2" dimensions 1/4 "Ratchet 1/4" short (4-4, 5-5-5,5-6-7-8-9-10-11-12-13-14mm) Head 1/4 "long (6-7-8-9-10-11-12-9-10-11-12-13-14mm) 13 mm) 1/4 "Extensions in 50 and 100mm Lengths 1/4" Extension with Handle 1/4 "Extension Kardan 1/4" Sliding Bracket 1/4 " Square Bits 1/4" TORX: 8-10-15-20-25-30 Square Bits 1/4 "IMBUS: 3-4-5-6 Square Bits 1 / 4 "flat 4-5,5-7mm and cross no.1 and 2 Ratchet 1/2" Head 1/2 "short (10-11-12-13-14-15 -16-17-18-19-20-21-22-23-24-27-30-32mm) Head 1/2 "long (14-15-17-19mm) Head 1/2 "on spark plugs, 16 - 21mm Extensions 1/2" in lengths of 125mm and 250mm (this length in combination with a sliding pin.) Kardan Bit Adapter Bit Set for 1/2 "

Set of socket heads and bits in sizes 1/4" and 1/2" The set includes: Ratchet 1/4" (36z) Head 1/4" short (4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm) Head 1/4" long (6-7-8-9-10 -11-12-13mm) 1/4" extension in lengths 50 and 150mm 1/4" extension with handle 1/4" spring extension 1/4" Cardan (36z ) Sliding ram 1/4" Square bits 1/4" TORX: 8-10-15-20-25-30 Square bits 1/4" IMBUS: 3-4- 5-6 Square bits 1/4" flat 4-5.5-7mm and cross PH1 , PH2 , PZ1 , PZ2 Ratchet 1/2" Head 1/2" short (10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32mm) Head 1/2" long (14- 15-17-19mm) Heads 1/2" for spark plugs, 16 - 21mm 1/2" extensions in lengths 125mm and 250mm (this length in combination with a sliding shaft. Cardan Bit adapter Bit set for 1/2" adapter 8mm bits: PH3 - PH4 - PL8 - PL10 - PL12 - PZ3 - PZ4 - H8 - H10 - H12 - H14 - T40 - T45 - T50 - T55 Bend Allen keys: 1.5 - 2 - 2.5 mm

1/4 "Bits / Hexagon With Lock Ball For Hex Shaped Bits 1/4", 6,35mm Square: 1/4 " Material: Cr-V, i.e., chromium-vanadium

Bits / Hexagon Socket 3/8 "with Lock Ball For Hexagon Socket Bits 5/16", 7,9mm Square: 3/8 " Material: Cr-V, i.e., chromium-vanadium

Extension to GOLA HEAD 1/2 " Overall Length: 75mm Material: Cr-V, ie Chrome-Vanadium