Grooving insert for slotting holder 8 H7 with chamfer, IN-08-H7-SM
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000470079
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-IN-08-H7-SM
Product information
Insert width: 8mm
Edge tolerance: H7(8,015mm)
Other dimensions - see enclosed data sheet
Material: HSSE-PM( sintered cobalt steel)
Coating: TiN
Chamfering of the cutting edges helps to prevent the formation of "increments" during slotting / forming at the groove bearing surface.
The insert can be re-sharpened 2-3 times.
Holders for this insert can be found in related products.
Accessories
-
Slotting groove holder for inserts 8mm, UT-08-25
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 68mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,33 € with VAT -
Slotting groove holder for inserts 8mm, UT-08-32L
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 100mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request218,33 € with VAT -
Slotting groove holder for 8mm inserts, UT-08-32
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 68mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request218,33 € with VAT -
Slotting groove holder for inserts 8mm, UT-08-25L
Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 100mm Shank diameter: 25mm Shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,33 € with VAT -
Slotting groove holder for 6 and 8mm inserts, UTSZ-06/08
Slotting knife / holder for slotting machines For slotting width / insert sizes: 6mm and 8mm Knife profile: 15.5 x 12.0mm Minimum hole diameter : 17,9mm / 18,4mm Depth of cut: limited by the total length of the holder / machine Total length of the holder: 220mm Other dimensions - see the enclosed catalog sheet. The holder is made of heat treated hardened steel. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock159,26 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!