Grooving insert for slotting holder 5 C11, IN-05-C11
| 2 C11 |
In stock
(1x)
|
45,24 € with VAT |
| 3 C11 |
In stock
(2x)
|
45,24 € with VAT |
| 4 C11 |
In stock
(2x)
|
45,24 € with VAT |
| 5 C11 |
In stock
(1x)
|
45,24 € with VAT |
| 6 C11 |
In stock
(1x)
|
54,28 € with VAT |
| 8 C11 |
In stock
(1x)
|
54,28 € with VAT |
| 10 C11 |
In stock
(1x)
|
67,55 € with VAT |
| 12 C11 |
In stock
(1x)
|
67,55 € with VAT |
| 14 C11 |
In stock
(2x)
|
82,78 € with VAT |
| 16 C11 |
In stock
(2x)
|
78,99 € with VAT |
| 18 C11 |
On request
|
135,34 € with VAT |
| 20 C11 |
On request
|
135,34 € with VAT |
| 22 C11 |
On request
|
135,34 € with VAT |
| 25 C11 |
On request
|
135,34 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000469929
- Brand:
- BRIGHETTI MECCANICA
- Warranty:
- 24 months
- Code:
- BM-IN-05-C11
Product information
Insert width: 5mm
Edge tolerance: C11(5,145mm)
Other dimensions - see enclosed data sheet
Material: HSSE -PM( sintered cobalt steel)
Coating: TiN
The insert can be reground 2-3 times.
Holders for this insert can be found in related products.
Variants
Accessories
-
Slotting groove holder for 5mm inserts, UT-05-25
Slotting cutter / holder for CNC For slotting width / insert size: 5mm Face diameter: 12mm Minimum hole diameter: 13mm Cutting depth: 46mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
On request218,33 € with VAT -
Slotting groove holder for 5mm inserts, UT-05-32L
Slotting cutter / holder for CNC For slotting width / insert size: 5mm Face diameter: 12mm Minimum hole diameter: 13mm Cutting depth: 66mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock223,62 € with VAT -
Slotting groove holder for inserts 5mm, UT-05-25L
Slotting cutter / holder for CNC For slotting width / insert size: 5mm Face diameter: 12mm Minimum hole diameter: 13mm Cutting depth: 66mm Clamping shank diameter: 25mm Clamping shank length: 90mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,33 € with VAT -
Slotting groove holder for 5mm inserts, UT-05-32
Slotting cutter / holder for CNC For slotting width / insert size: 5mm Face diameter: 12mm Minimum hole diameter: 13mm Cutting depth: 46mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock218,33 € with VAT -
Slotting groove holder for 4 and 5mm inserts, UTSZ-04/05-120
Slotting knife / holder for slotting machines For slotting width / insert sizes: 4mm and 5mm Knife profile: 11.3 x 11.3mm Minimum hole diameter : 10,4mm / 10,8mm Depth of cut: 60mm Overall length of the holder: 200mm Other dimensions - see the enclosed catalog sheet. The holder is made of heat treated hardened steel. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.
In stock168,67 € with VAT
Alternatives
-
Carbide slotting insert for slotting holder 5 C11, INHM-05-C11
Carbide shaping insert for UT- and UTSZ- holders Insert width: 5mm Edge tolerance: C11(5,145mm) Other dimensions - see enclosed catalog sheet Material: TK / SK / VHM - carbide Coating: PVD, TiCN The insert can be reground 2-3 times. Holders for this insert can be found in related products.
On request47,57 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!