Gauges, templates and calipers

Check mandrel / roller check pin Diameter: 19.88 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.89 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.9 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter : 19.91 mm Length of ground part : 106mm Total length : 120mm Tolerance : J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.92 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.93 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.94 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.95 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.96 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.98 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 19.99 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock

Check mandrel / roller check pin Diameter: 20.01 mm Length of ground part: 106mm Total length: 120mm Tolerance: J7 (-0.001mm ; 0.001mm) Grounded and lapped surface, ground between the points Material: alloy calibration steel, 58 HRC, quality stable steel Suitable for checking the diameter and ovality of holes or can be used as control mandrel Before use, the dipstick needs to be degreased and preserved after use. Unused gauge, from excess stock