G (BSP)

Manual disposable nut tap G for pipe thread Fitting: A Standard: CSN 22 3064 Material: NO - Tool Steel NO taps are suitable for thread stretching or for piece thread cutting.

Manual disposable nut tap G for pipe thread Fitting: A Standard: CSN 22 3064 Material: NO - Tool Steel NO taps are suitable for thread drawing or for thread cutting.

Hand set tap G for pipe thread Climb: basic Fitting: A Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 NO taps are suitable for thread stretching or for piece thread cutting.

Hand taps G - for pipe thread Thread type: G / BSP (British Standard Pipe) - British pipe thread Material: TS - Tool Steel Standard: CSN 22 3012 TS taps are suitable for thread drawing or for thread cutting. Manufacturer: Mostly Czech, possibly German or Polish production from the last century, unused - excess stock.

HSSE-PM sintered steel set tap The pre-cutting tap has an insert with a drill diameter under the thread Fitting: AX Standard: DIN 5157, DIN-ISO 228 Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Hand set tap G for pipe thread Climb: basic Fitting: A Material: HSS - High speed steel Standard: ČSN 22 3012 / CSN 223012

Hand tubular tap G / BSP Thread type: English standard inch whitworth thread - British Standard Pipe thread Pitch: basic Material: HSS - High speed steel Standard: DIN5157, DIN ISO 228 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tubular tap G / BSP Thread type: English standard inch whitworth thread - British Standard Pipe thread Pitch: basic Material: HSSE - High speed cobalt steel HSSCo5 Standard: DIN5157, DIN ISO 228 Taps are suitable for cutting threads in common steels and stainless steels (up to 1200MPa)

Hand set tap G for pipe thread Climb: basic Fitting: A Material: HSSE VA - cobalt high-speed steel - stainless steel design Coating: OX - oxidation Standard: DIN5157 (replacement for ČSN 22 3012 / CSN 223012) Usage: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Malleable cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other light metals

Left hand tubular tap G / BSP Thread type: English standard inch whitworth thread - British Standard Pipe thread Pitch: basic Material: HSS - High speed steel Standard: DIN5157, DIN ISO 228 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tap G 1 "for tubular thread Angle: 11 strokes per inch, basic Face: A Material: NO - Tool steel ČSN 22 3012 / CSN 223012 Taps from NO are suitable for threading or single thread cutting.

G 1/4 "Hand Tap Gauge for Tubing Thread Gradient: 19 Strokes per Inch, Basic Face: A Material: NO - Tool Steel ČSN 22 3012 / CSN 223012 < Taps from NO are suitable for threading or thread cutting.