For steel
-
Machine tap M - HSSE ISO2 C(6H), FANAR
Machine tap (high speed) M, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 7,94 € with VAT -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX), FANAR
Machine tap with straight groove, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 11,89 € with VAT -
Machine tap M - HSSE-PM 1400-HT TiAlSiN ISO2 (6HX), FANAR
Machine tap with straight groove, made of sintered steel, type PM TS 1400 HT TC Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 12,73 € with VAT -
Machine tap without chip breaker, final sale
Clearance saleMachine tap (high speed) without chip breaker Straight groove, ground thread profile Diameter and incline: according to the selected variant Form: according to the selected variant (rise length - see attached photo) Standard: CSN 22 3042 Material: according to the selected variant
from 2,40 € with VAT -
Machine tap M long - HSSE ISO2 (6H), FANAR
Extra long machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 11,18 € with VAT -
Machine tap M - HSSE ISO2 C, VOLKEL
Right machine tap, straight slot, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 6,73 € with VAT -
Machine tap M - HSSE ISO2 A, VOLKEL
Right machine tap, straight slot, for metric thread with long lead Tolerance: ISO2 / 6H Form: A - long rise Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 6,73 € with VAT -
Machine tap M left - HSSE ISO2 C, VOLKEL
Left machine tap, straight slot, for metric thread Tolerance: ISO2 / 6H Form: C (lead 2-3 threads) Material: HSSE - High speed cobalt steel Standard: DIN 371 / DIN 376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 19,61 € with VAT -
Machine tap M - 2N DIN with straight groove, CZTOOL
Machine tap (high speed) straight slot without chip breaker Fitting: 2N (medium tolerance) Rise: C (2 ramps) Rolled thread profile Material: HSS or HSSE (HSSCo5) Usage: Non-alloy steels with strength up to 600 N / mm2 (HSS) Non-alloy steels with strength up to 800 N / mm2 (HSSE) Soft materials (brass, copper, aluminum) Rolled taps with medium tolerance 2N are suitable for common screw connections - without thread tolerance requirements. Threading
from 3,58 € with VAT -
Machine tap M - 4H HSSE CSN 223042 with straight groove, CZTOOL
Machine tap (high speed) straight slot with ground thread profile Fitting: ISO1 / 4H - ground thread profile (tight thread - eg aerospace industry, etc.) Material: HSSE (High speed steel + 5% Cobalt) Standard: CSN 22 3042 (up to M10 reinforced shank, from M12 classic shank) These taps can also be supplied coated (TiN) on request.
from 8,97 € with VAT -
Machine tap M - 6H HSSE DIN with straight groove, CZTOOL
Machine tap( high speed) straight slot with ground thread profile Fitting: ISO2 / 6H - ground thread profile, standard tolerance Material: HSSE( High speed steel 5% Cobalt ) Standard: DIN371 / DIN376 These taps can also be supplied coated on request(TiN)
from 8,81 € with VAT -
Machine tap M5 HSSE ISO2(6H) DIN371 straight slot, NAREX 1000
Clearance saleMachine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips
On request8,58 € with VAT
