For stainless steel

Machine spiral tap( high speed cutter 29 M 4 R45 PM in helix 4x0,7 Pitch: 0,7, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency for cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap(high speed) M 6 R45 PM in helix 6x1,0 Pitch: 1,0, basic Fitting: ISO2 / 6HX - Grinding thread profile Standard: DIN 371 < br> Thread approach: C, 2 runs - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Thread grinding profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency Also for piece cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutting machine 29 M 10 R40 PM TC 1200 in helix 10x1,5 FAN Pitch: 1,5, basic Facial ISO3 / 6G - ground thread profile - free thread - zinc plated Standard: DIN 371 Thread start: C, 2 runs - see enclosed foto Material: HSSE-PM( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: TiAlSiN < br> Helix angle: 40 ° Application: 1.4: Alloy steels, cold-drawn tool steel up to 1000N / mm2 1.5: Hardening © and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball metallic and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloyed steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics FANAR taps of the quality correspond to the Czech Republic !VitnAkA—m N @ rex, Series 2680

Machine spiral tap ( quick cutting ) M 10, R40 HL INOX spiral, in helix Dimension: M10x0.5 Pitch: 0.5, fine Fit: ISO2 / 6H - ground profile thread Standard: DIN 374 C Thread pitch: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Spiral groove angle : 40° Coating : HL - Balinit HardLube Use : 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N /mm2 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N/mm2 1.4 : Alloy steels, cold-drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 - Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) FANAR taps correspond in quality to the Czech N@rex taps, series 4320

Machine spiral tap ( quick cutting ) M 24, R40 HL INOX spiral, in helix Dimension: M24x3.0 Pitch: 3.0, basic Fit: ISO2 / 6H - ground profile thread Standard: DIN 376 C Thread lead: C, 2 courses - see attached photo Material: HSSE ( High-speed steel 5% Cobalt ) Grounded thread profile Spiral groove angle : 40° Coating : HL - Balinit HardLube Use : 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 2.2 : Austenitic corrosion-resistant steel up to 850N /mm2 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N/mm2 1.4 : Alloy steels, cold-drawn tool steel up to 1000N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 - Food-grade corrosion-resistant steel (does not enlarge the thread, keeps the prescribed tolerance) FANAR taps correspond in quality to the Czech N@rex taps, series 4320

Machine spiral tap ( quick cutting ) M 14 R15 PM TS 1400-HT in helix 14x1.0 Pitch: 1.0, fine Fit: ISO2 / 6HX - ground thread profile Standard : DIN 374 Thread lead : C , 2 courses - see attached photo Material : HSSE-PM ( High-speed steel 5% Cobalt , production by sintering ) Grounded thread profile Coating : TiAlSiN Helix angle : 15° Use : 1.5 : Hardened and hardened steels up to 38 HRC up to 1400N/mm2 1.6 : Steel alloys and hardened steels up to 44 HRC 3.1 : Gray cast iron 3.3 : Nodular and malleable cast iron up to 700N/mm2 4.6 : Brass (copper-zinc steel with short chip) 4.9 : Copper alloys with short chip

Machine spiral tap for NC / CNC machines (high speed) M 10 in helix 10x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 12 in helix 12x1,75 S-NC Gradient: 1,75, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steel, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: up to 400M / mm2 1.2: Construction and automation steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Refractory corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon with up to 5% silicon content up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 14 in helix 14x1,0 S-NC Gradient: 1,0 , fine Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 374 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap for NC / CNC machines (high speed) M 16 in helix 16x2,0 S-NC Gradient: 2,0, basic Facing: ISO2 / 6HX - Cut thread profile Norma : DIN 376 Thread start: C, 2 steps - see attached photo Material: HSSE-PM (Cutting steel 5% Cobalt) Cutting thread profile Coating: TiCN - Carbon Nitride Titanu Helix Angle: 45 ° Usage: 1.3 : Structural and carbon steel, low alloy steel, steel up to 1100N / mm2 1.4 : Alloyed steels, tool steel cold drawn to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / : Ball and chrome cast iron up to 700N / mm2 3.4 : Cast and rolled cast iron up to 1000N / mm2 1.1: to 400M / mm2 1.2: Structural and automotive steel up to 500N / mm2 1.5: T Painted and tempered steels up to 38 HRC to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat resistant corrosion-resistant steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloy with long chipping up to 800N / mm2 4.8: Aluminum and zinc alloy with long chipping up to 800N / mm2 6.3: 700N / mm2 7.2: Aluminum silicon containing up to 5% silicon up to 700N / mm2 7.3: Aluminum silicon alloy from 5% to 10% up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine spiral tap(high speed) M 10 R45 PM in helix 10x1,5 Pitch: 1,5, basic Fitting: ISO2 / 6HX - Grinding thread profile Standard: DIN 376 < br> Thread approach: C, 2 runs - see attached photo Material: HSSE-PM(Speed ??Cutting steel 5 coating, sintering) Thread grinding profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV Helix angle: 45 Â ° Application: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in an emergency Also for piece cutting of thread into hardened steel. Suitable for machining centers, or for older types of numerical and conventional machines with lower power.

Machine spiral tap( high speed cutter 29 M 12 R45 PM in helix 12x1,75 Pitch: 1,75, basic Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 376 Thread start: C, 2 turns - see attached photo Material: HSSE-PM ( High-speed steel 5% Cobalt, sintering) Grinding thread profile Coating: HL - Balinit HardLube with carbide component(TiAlN WC / C) with hardness 2600 HV helix angle: 45 ° Application: Universal - for steel, stainless steel, cast iron, non-ferrous metals and refractory © steel, can also be used in an emergency for cutting threads into hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower power.