For lathe

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

3-jaw tap chuck Clamping (inner B cone or outer morse taper): according to the selected variant Number of jaws: 3 + square clamping Other dimensions - see description for individual variants Tightens by turning the threaded head in which there are three jaws, then the enclosed Allen key and two internal stop jaws for attaching the square shank of the tap.

Double-jaw chuck with Allen key for firm clamping of taps Clamping range: according to the selected variant Clamping cone (internal): according to the selected variant Other dimensions - see the description of the selected variant We recommend use from M12, for smaller taps use a classic 3-jaw chuck, or a three-jaw chuck with square clamping - type VTA

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (cylindrical): according to the selected variant Clamping shank length: see description for variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Clamping shank: 20mm diameter, with welding plate Clamping range of taps: M3 - M16 Fuse behind the inner square of the tap - see enclosed photo. Collars: ER20 Length from spindle: 70mm Clamping lenght: 80mm

Clamping Shank: Diameter 32mm, with Welding Plate Clamping Taps: M3 - M25 Fuse for Internal Quadrant - see attached photo. Collars: ER32 Length from spindle: 90mm Clamping lenght: 100mm

Clamping Shank: Dia. 20mm, with Welding Plate Clamping Taps: M3 - M10 Fuse for Internal Quadrant - see attached photo. Collet: ER16 Length from spindle: 47mm Clamping lenght: 80mm

Screwdriver head for TC 312 for machine taps to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque clutch is set directly on the collet. Clamping range: M1 - M16 (need to buy TC312 collet) Clamping shank: 32mm, cylindrical Clamping length: 70mm Clamping method: < / b> The taps are clamped into the TC312 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC312 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC312 collet which has a pre-set torque clutch or can be fine-tuned as needed.

Tool for cutting threads / machine beam on threaded round jaws after purchase of adapter and for taps(see related products) Clamping shank: taper MK1 Designed for cutting external threads This is a practical and ready-made tool for cutting teeth Win on the lathe. The tool consists of a cylindrical mandrel with an MK1 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm The set also includes a retaining rod for catching the reaction Dimensions: Total length including clamping shank: 155-170mm(accessible to the housing) Clamping shank: conical, MK1(morse 1) Maximum extension / step: 50mm K An adapter for clamping M3-M8 and M5-M12 taps and a drill chuck can be purchased separately - see related products.

Tool for cutting threads / machine beam on threaded round jaws after purchase of adapter and for taps(see related products) Clamping shank: taper MK2 Designed for cutting external threads This is a practical and ready-made tool for cutting teeth Win on the lathe. The tool consists of a cylindrical mandrel with an MK2 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm The set also includes a retaining rod for catching the reaction Dimensions: Total length including clamping shank: 155-170mm(accessible to the housing) Clamping shank: conical, MK2(morse 2) Maximum extension / step: 50mm K An adapter for clamping M3-M8 and M5-M12 taps and a drill chuck can be purchased separately - see related products.

Tool for cutting threads / machine beam for taps and threaded round jaws Clamping shank: taper MK2 Designed for cutting external and internal threads This is a practical and ready- made tool for cutting threads on a lathe. The tool consists of a cylindrical mandrel with an MK2 shank and bushings for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm, adapters for taps M3-M8 and M5-M12. The set also includes a retaining rod for catching the reaction Dimensions: Total length including clamping shank: 155- 170mm(according to the inserted case) Clamping shank: conical, MK2(morse 2) Maximum extension / step: 50mm The fixture can be purchased separately drill chuck - see related products.

Tool for cutting threads / machine beam on threaded round jaws after purchase of adapter and for taps(see related products) Clamping shank: taper MK3 Designed for cutting external threads This is a practical and ready-to-use tool for cutting teeth Win on the lathe. The tool consists of a cylindrical mandrel with an MK3 shank and sleeves for clamping threaded eyes with an outer diameter: 20mm, 25mm, 30mm and 38mm The set also includes a retaining rod for capturing the reaction Dimensions: Total length including clamping shank: 155-170mm(accessible to the housing) Clamping shank: conical, MK3(morse 3) Maximum extension / step: 50mm b> An adapter for clamping M3-M8 and M5-M12 taps and a drill chuck can be purchased separately for the jig - see related products.