For drill / milling machine

Reversible tapping head / reversing tap Clamping range: according to the selected variant Clamping shank (morse taper): according to the selected variant Other dimensions - see the description for each variant Type K1 is with a drill chuck, types K2, K3 and K4 are with clamping behind the stones After cutting the set depth, the speed will change The tap is without a torque coupling, ie it does not protect the tap from bending. Instructions for use - see attached PDF

Reversible tapping head / reversing tap Clamping range: according to the selected variant Clamping shank (cylindrical): according to the selected variant Other dimensions - see the description for each variant Type K1 is with a drill chuck, types K2, K3 and K4 are with clamping behind the stones After cutting the set depth, the speed will change The tap is without a torque coupling, ie it does not protect the tap from bending. Instructions for use - see attached PDF

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (steep ISO cone): according to the selected variant Standard: JIS 6339 BT The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (steep ISO cone): according to the selected variant Standard: DIN69871 The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

3-jaw tap chuck Clamping (inner B cone or outer morse taper): according to the selected variant Number of jaws: 3 + square clamping Other dimensions - see description for individual variants Tightens by turning the threaded head in which there are three jaws, then the enclosed Allen key and two internal stop jaws for attaching the square shank of the tap.

Double-jaw chuck with Allen key for firm clamping of taps Clamping range: according to the selected variant Clamping cone (internal): according to the selected variant Other dimensions - see the description of the selected variant We recommend use from M12, for smaller taps use a classic 3-jaw chuck, or a three-jaw chuck with square clamping - type VTA

Quick-clamping tapping head without length compensation for attachments for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank: according to the selected variant This type (SF) is without length compensation! The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Quick-clamping tapping head with length compensation for bits for machine taps according to DIN371 DIN374 and DIN376 Clamping range of the tap: according to the selected variant Clamping shank (cylindrical): according to the selected variant Clamping shank length: see description for variant The torque coupling is set directly on the attachment. Tap clamping method: Taps are clamped in extensions, which need to be purchased separately. The taps are secured in the extension with a square and a clamping shank. The tap is held firmly in the extension, pulled out after pressing the clamping collar. The extensions are secured in the head over a bearing and stones. In addition to the tapping head, it is also possible to purchase additional attachments for taps manufactured in accordance with JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps manufactured according to DIN371,374,376 standards Clamping tongs TC-312 / TC-820 / TC-1433 are not part of the tap - they need to be purchased separately! Usage: The tap is clamped in a suitable attachment, which has a torque coupling already preset, or it can be fine-tuned as needed.

Reverse die head M2-8 Morse - MK2 Clamping range: M2 - M8 | Securing the drill column (optimum column diameter up to 85mm, or holding hands) Instructions for use below. Ref. No .: 3404-002

Replacement clamping stone for K2-MT2 and K2-1/2 taps Used to clamp the square of the tap

Replacement clamping stone for K2-MT2 and K2-1/2 taps Used to clamp the shank of the tap

Reversible tapping head / reverse thread M5-10 Clamping shank: morse - MK2 Clamping range: M5 - M10 | Securing the drill column (optimum column diameter up to 85mm, or holding hands) Instructions for use below. Ref. No .: 3404-004