Fixed turning mandrel 19mm with driving surfaces, DIN

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 19mm Total length : 110mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimension of the mandrel is marked on the larger diameter side Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved until it will not be caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed lathe mandrel with bearing pads / conical clamping mandrel Nominal diameter: 19mm D1: 19,06 mm D2: 18,994 mm d: 16.0 L: 145mm Max. load: 220 kp(Kilopond) Conical: 1: 2000 Lathe mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimensions The mandrel is marked on the larger diameter side The mandrels are mainly used for machining smaller rotary objects. Ji, which have already machined a hole The object of machining is slid to the smaller side of the mandrel and moved until it is caught on the conical surface of the mandrel To achieve For greater accuracy, it is recommended to clamp the mandrel between the points. The rotation is then provided by a heart carrier, which is attached to the side of the mandrel with a flat surface. Standard: A „A’SN 243350