Fixed turning mandrel 11mm with driving surfaces, DIN

Fixed turning mandrel with carrying surfaces / conical clamping mandrel The mandrel comes from above-standard stock, manufacturer Zbrojovka Vsetín, it does not have to be in 100% condition, it can be used. Nominal diameter d : 11mm Total length : 75mm Taper : 1:2000 The lathe mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimension of the mandrel is marked on the larger diameter side Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The object to be machined is pushed onto the smaller side of the mandrel and moved until it will not be caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350

Fixed mandrel mandrel with bearing pads / conical clamping mandrel Nominal diameter: 11mm D1: 11,05 mm D2: 10,997 mm < br> d: 10,0 L: 100mm Max. load: 62 kp(Kilopond) Conical: 1: 2000 Turning mandrels are made of high quality steel, hardened and ground Mandrels are conical Dimensions The mandrel is marked on the side of the larger diameter The thorns are mainly used for machining smaller rotary objects. three that have already machined a hole The machining object slides on the smaller side of the mandrel and moves until it catches on the conical surface of the mandrel Pro To achieve greater accuracy, it is recommended to clamp the mandrel between the points. The rotation is then provided by a heart carrier, which is attached to the side of the mandrel with a flat surface. Standard: ÄOSN 243350