Fixed driving tip MK4, type VDK, VERTEX
MT4 - 16mm |
In stock
(1x)
|
138,18 € with VAT |
MT4 - 23mm |
In stock
(2x)
|
168,89 € with VAT |
MT4 - 32mm |
In stock
(3x)
|
160,29 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- VERTEX
- Warranty:
- 24 months
Product information
Diameter of the driving part: according to the selected variant
Other dimensions - see descriptions of individual variants
To clamp the workpiece between the centers, it is clamped to the lathe spindle directly or via a reduction sleeve. A rotating tip is suitable for the tailstock quill.
Before clamping the workpiece, it is necessary to first drill centering holes in the workpiece.
Body and tip are made of SLD steel, HRC 62 °
Variants
Accessories
-
Swivel tip MK4, 3 bearings
Morse 4 Clamping Taper (MK IV) Angle of Tip: 60 ° Tip Diameter: 32mm Tip Length 37mm Body Diameter: 60mm Length of Taper MK4: Overall length 200mm Number of bearings: 3 Volt speed according to Fig. 2 Max. Circular runout: 0,01mm Max. radial load: 3200N (320kg) The tip is detachable - front and rear
In stock34,39 € with VAT -
MK4 swivel tip with carbide tip
Morse 4 Taper Cone (MK IV), Carbide Tip Angle of Tip: 60 ° Tip Diameter: 32mm Tip Length: 35mm Diameter Body Diameter: 60mm Length of Taper Morse MK4: 110mm Overall length: 206mm Number of bearings: 3 Max. rpm: 3200 rpm Max. order. Load: 3200N (320kg) Accuracy 0.015mm
In stock51,64 € with VAT
Alternatives
-
Fixed driving tip MK4 - 16mm, VDK-15-MT4
Diameter of centering tip: 6mm Drilling diameter: 16mm Number of teeth: 6 For clamping of workpiece between spikes , clamped into the lathe spindle directly or through the reduction sleeve. A rotary tip is suitable for the tailstock pin. Before the workpiece is clamped, it is necessary to drill the centering pins first.
In stock138,18 € with VAT -
Fixed driving tip MK4 - 32mm, VDK-32-MT4
Mortar Taper Pin 4, ie MK4 for Wood, Plastic, etc. Centering Spindle Diameter: 8mm Diameter of Drilling Part: 32mm Number of Teeth: 8 For clamping the workpiece between spikes , clamped into the lathe spindle directly or through the reduction sleeve. A rotary tip is suitable for the tailstock pin. Before the workpiece is clamped, it is necessary to drill the centering pins first.
In stock160,29 € with VAT
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!