Face milling cutter 33x15.5 x 200mm for CCMT 09T3 with internal cooling, AKKO

VBD CCMT 09T304 SM IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type SM: Perfect for normal and finishing operations, ideal for machining non-traditional alloys Ref. No. 5509500

VBD CCMT 09T304 SM IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Terms and conditions - see attached photo SM type: Perfect for common and finishing operations , ideal for machining non-traditional alloys Ref. No .: 5504773

Turning insert VBD CCMT 09T304 -SM IC5005 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN < b> IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type SM: Perfect for common and finishing operations, ideal for machining non-traditional alloys Ord. Ä. : 5508253 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CCMT 09T304 -SM IC5010 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN < b> Series IC5010: The boards have a very hard substrate(backing), ideal especially for gray and ductile machining. Cast iron under stable or slightly unstable conditions - uninterrupted or slightly intermittent cutting -> finishing operations. Usage: Cast iron: K10-K25 General conditions - see attached photo Type SM: Perfect for ordinary and finishing operations, ideal for machining non-traditional alloys Ord. Ä. : 5508254 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 09T304 SM IC9350 Radius 0,4mm Coating: CVD, TiCN alpha Al2O3 TiN < b> Series IC9350: Very solid substrates with cobalt layer supplemented by MTCVD TiCN and Al2O3 coating. Excellent rigidity and resistance to wear when machining steel. Suitable for intermittent and unstable cutting conditions. Usage: Steel: P20-P45 Stainless steel: M15-M30 Terms - see attached photo Type SM : Perfect for common and finishing operations, ideal for machining non-traditional alloys Ord. Ä. : 05507642 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CCMT 09T304 PF IC830 Coating: PVD, AlTiN TiN IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo PF Type: Suitable for conventional and finishing operations of conventional steels and non-traditional alloys Ref. No .: 5568600

Turning insert CCMT 09T304 E-UR ; T8430 Radius: 0.4mm Insert material: T8430 - PVD (TiBN TiN AlTiN) It is the most versatile material for general turning and heavy roughing, even under very adverse conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Usage: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 Order no. : 80032875The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement cutting insert CCMT 09T304 - HMP NC3120 Radius: 0,4mm Sheet material: NC3120 - suitable for common machining to roughing of steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 City type: Medium until the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement cutting insert CCMT 09T304 - HMP PC9030 Radius: 0,4mm Sheet material: PC9030 - universal sorta - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titanium Aluminum Nitride) Application: Stainless steel: M25-M35 City type: Steel One to the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 09T304 WG IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN < b> Series IC8250: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type WG : Suitable for high-feed machining, where a very smooth surface can be achieved. Ord. Ä. : 5550219 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert CCMT 09T304 - HMP PC9030 Radius: 0.4mm Insert material: PC5300: Universal series for machining steel, cast iron, difficult-to-machine materials and stainless steel. High resistance to breakage and growth for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Type HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even when the depth of cut suddenly changes. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart. Cat. No.:102036391

CCMT 09T304 - C25 NC3120 Uses: Steel: P10-P35 Stainless steel: M05-M10 Cast iron: --- Non-ferrous metals (aluminum and copper): --- Super-alloys (Ni, Co, Fe, Ti): --- Hardened: ---