Face milling cutter 18x7 x 100mm for CCMT 0602 with internal cooling, AKKO

Replacement cutting insert CCMT 060204 - HMP NC3120 Radius: 0,4mm Sheet material: NC3120 - suitable for common machining to roughing of steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 City type: Medium until the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement cutting insert CCMT 060204 - HMP PC9030 Radius: 0,4mm Sheet material: PC9030 - universal sorta - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 City type: Steel Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert CCMT 060204 E-UR; T8430 Radius: 0,4mm Blade material: T8430 - PVD(TiBN TiN AlTiN) It is the most universal material for general turning and heavy roughing, even under very unfavorable conditions. It was developed for steel and cast steel, but also has excellent results in stainless steels, cast irons and superalloys. Application: Steel: P20-P40 Stainless steel: M20-M35 Cast iron: K25-K40 Non-ferrous metals: N15-N30 Cat. No.: 80032868Compared to the existing material(T-8330) offers a significant increase in durability, especially when machining semi-finished products from crude steel or difficult to machine materials such as Inconel and Stellite. T8430 is suitable for a variety of materials, including steels, stainless steels, cast irons and non-ferrous metals. The unique TiBN top coat( titanium and boron nitride) reduces the risk of edge build-up and improves performance, while the thick TiN layer features low compressive stress for high resistance to cutting edge breakage. In addition, the hard AlTiN layer of T8430 material ensures resistance to back wear and the bright gold TiN layer supports wear detection. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 060204 SM IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN < b> Series IC8250: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Usage: Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type SM : Perfect for common and finishing operations, ideal for machining non-traditional alloys Ord. Ä. : 5508088 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 060204 -14 IC830 Radio 0,4mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type 14: Suitable for common and finishing operations on mild steels, also ideal for machining non-traditional alloys Ord. Ä. : 5567367 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CCMT 060204 -14 IC5005 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN < b> IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and a thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 General conditions - see attachment © photo Type 14: Suitable for common and finishing operations on mild steels, also ideal for machining non-traditional alloys Ord. Ä. : 5550208 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD CCMT 060204 SM IC907 Radius 0,4mm Coating: PVD, TiAlN TiN IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Terms and conditions - see attached photo SM type: Perfect for common and finishing operations , ideal for machining non-traditional alloys Ref. No .: 5504873

VBD CCMT 060204 PF IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo PF Type: Suitable for conventional and finishing operations of conventional steels and non-traditional alloys Ref. No .: 5568585