English inch threads
-
Machine tap W - HSSE with chip breaker, VOLKEL
Machine tap, straight groove with chip breaker, for English whitworth thread Thread type: W (BSW - Whitworth) - English inch whitworth coarse thread - basic pitch Size: according to the chosen variant Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: DIN371 / DIN376 - according to selected variant Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 11,53 € with VAT -
Machine tap W - HSSE spiral, VOLKEL
Spiral machine tap, for English whitworth thread Thread type: W (BSW - Whitworth) - English inch whitworth coarse thread - basic pitch Size: according to the chosen variant Form: C Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: DIN371 / DIN376 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes
from 14,56 € with VAT -
Short machine tap W - HSS DIN352, VOLKEL
Short machine whitworth tap Thread type: BSW - British Standard Whitworth tap Material: HSS - High speed steel Form: D Standard: DIN 352, BS84 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes
from 5,03 € with VAT -
Machine tap BSF - HSSE with chip breaker, FANAR
Machine tap (high speed) with chip breaker, straight slot Thread type: BSF - British Standard Fine thread Thread lead: B, 4 courses - see attached photo Thread apex angle: 55 ° Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 18,57 € with VAT -
Machine tap W 3/8 "x 16 DIN376 C spiral HSSE, VOLKEL
Machine Screw Spiral, to English whitworth thread Size: BSW 3/8 "x 16( corresponds to 9,525 mm) Ascent: 16 walk to inch Form: C Material : HSSE - Speed ??â € ‹â €‹ Steel 5% cobalt Co5 Standard: DIN376 Usage: Good machinable materials up to 900 N / mm2 Non-alloyed and alloyed steels For through holes
In stock20,15 € with VAT -
Machine tap W 21.8 x 14 HSS, CZTOOL
Machine tap with straight groove whitworth BSW 21.8 x 1/14, custom production Pitch: 14 feet per inch, basic(W21,8x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves
On request153,82 € with VAT -
Machine tap W 24.32 x 14 HSS, CZTOOL
Machine tap with straight groove whitworth BSW 24,32 x 1/14, custom production Pitch: 14 feet per inch, basic(W24,32x14) Material: HSS - High speed steel BSW - British Standard Whitworth Application: gas cylinder valve thread / threads of gas cylinder valves
On request153,82 € with VAT -
Machine tap BSF 1 1/8" x 9 HSS DIN374 C, CZTOOL
Machine tap ( high-speed ) BSF 1-1/8", straight slot, custom made Pitch: 9 turns per inch, fine Standard: DIN 371 Thread start: B, 4 courses - see attached photo Material: HSS Grounded thread profile Usage: Unalloyed steel with strength up to 800N/ mm2 Brass with a long chip Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
On request194,06 € with VAT