End mills

Roughing end mill 40x125 mm ( 40x125mm ) , with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 40 mm Blade length l : 125mm Clamping shank d (h6) : 40mm Total length : 210mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Helix angle: 45° Use: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order. code: outside the norm - series 13504-534 D1

Roughing end mill 50x150 mm ( 50x150mm ), with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 50 mm Blade length l : 150mm Clamping shank d (h6) : 50mm Total length : 250mm Number of blades : 6 pcs. ( 6 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Helix angle: 45° Use: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order. code: outside the norm - series 13504-535 D1

Roughing end mill 63x150 mm ( 63x150mm ), with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 63 mm Blade length l : 150mm Clamping shank d (h6) : 63mm Total length : 270mm Number of blades : 8 pcs. ( 8 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Helix angle: 45° Use: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order. code: outside the norm - series 13504-535 D1

Four-blade / four-tooth end mill 12x26 mm ( 12x26mm ) , 2 teeth through the center with a cylindrical shank, type NR-F Diameter D (k10) :12 mm Blade length l: 26mm Clamping shank d (h6) : 12mm Total length : 83mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 124608.120 ( custom production)

Four-edge / four-tooth end mill 20x38 mm ( 20x38mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type NR-F Diameter D (k10) :20 mm Blade length l : 38mm Clamping shank d (h6) : 20mm Total length : 104mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 124618.200 ( custom production)

Four-edge / four-tooth end mill 10x45 mm ( 10x45mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type NR-F Diameter D (x10) : 10 mm Blade length l : 45mm Clamping shank d (h6) : 10mm Total length : 95mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 125618.100 ( custom production)

Four-edge / four-tooth end mill 14x53 mm ( 14x53mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type NR-F Diameter D (x10) : 14 mm Blade length l : 53mm Clamping shank d (h6) : 12mm Total length : 110mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type NR-F: For machining materials with lower to medium strength(up to 700Mpa) , processing Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 125618.140 ( custom production)

Four-blade / four-tooth end mill 8x38 mm ( 8x38mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type HR Diameter D (x10) : 8 mm Length blade l : 38mm Clamping shank d (h6) : 10mm Total length : 88mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844L, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type HR: For roughing materials with medium to higher strength(up to 1200 Mpa), machining Ra 6.3 and coarser. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 125618P.080 ( custom production)

Four-edge / four-tooth end mill 20x75 mm ( 20x75mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type HR Diameter D (x10) : 20 mm Length blade l : 75mm Clamping shank d (h6) : 20mm Total length : 141mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844L, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type HR: For roughing materials with medium to higher strength(up to 1200 Mpa), machining Ra 6.3 and coarser. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 125618P.200(custom production)

D: Clamping Shank D (h6): 20mm Overall Length: 88mm Number of Cuts: 4 Br. (4pcs) Helix Angle: 30 ° Angle of the Face: 10 ° Material: HSSCo8 (Contains 8% Coal) DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130 (CSN 22 2130) Usage: 3 axis machining tools Low alloy tool steels up to 1100 MPa Tool steel high alloy up to 1100 MPa Tooling and refined steel over 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Extra short range => Higher stiffness HR type: For roughing materials with medium to higher strength (up to 1200 MPa), machining Ra 6.3 and coarser. Ref. code: 128518S.200

Three-edged / three-tooth end mill 25x26 mm ( 25x26mm ) , 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k10) : 25 mm Blade length l : 26mm Clamping shank d (h6) : 25mm Total length : 101mm Number of blades : 3 pcs. ( 3br. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 1835 B , DIN 844 , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Automatic and structural steels up to 600MPa Aluminum and non-ferrous metals Order. code: 13502-258D1 - custom production

12x26 mm (12x26mm), cylindrical shank with welding groove D (k10): 12 mm Cutting length l: 26mm Clamping shank d (h6) : 12mm Overall Length: 83mm Number of Cuts: 4 Material: HSSCo8 (contains 8% cobalt) Standard: DIN 844, ISO 1641, ČSN 222132 Application: For materials with strength up to 900MPa (for more details, refer to 2.pages) Art. code: 140218.120