End mills

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 230418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8) : 2 mm Blade length l: 7mm Total length: 51mm Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 231418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 233418

Three-edged / three-tooth end mill, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Helix angle: 40° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222132 ( CSN 22 2132 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140418

Three-edged / three-toothed grooving cutter with asymmetric edges with a cylindrical shank with a groove for weldon clamping Diameter D (e8): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B, DIN 327 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 230417

Roughing end mill with three edges / three teeth, 1 tooth through the center with a cylindrical shank with a groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Helix angle: 35° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 844, ISO 1641, DIN1835B Usage: For machining in 3 axes Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 MPa Type NR-F : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it functions as a roughing and finishing tool. Order no. code - series: 104418P and 105418P

Extra short three-flute / three-tooth end mill with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Number of blades: 3 pcs. ( 3br. ) Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron up to 240 HB Cast iron over 240 HB Stainless steel up to 850 MPa Aluminium, Al-Si alloys up to 500 Mpa Order no. code - series: 160418 and 161418

End mill, 1 tooth through the center with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN1835 A / DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 120508 and 120518

End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 121518

End mill, 2 teeth through the center with a cylindrical shank Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Standard: DIN 844, ISO 1641 Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Order no. code - series: 140608, 140618 and 141618

End mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSE-PM, AlTiN coating Helix angle: 30° Head angle: 12° Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 120517 and 121517