Electromagnets

The BJP electromagnetic clamp is one of the most versatile electromagnetic clamps. Suitable for demanding grinding of a wide range of parts from a minimum size of 35x35x3mm. Thanks to the combined pole spacing, it clamps even massive parts very well. The electromagnet is operated simply by pressing a button on the control unit, which also enables variable force settings to create optimal clamping conditions. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 130N/cm2 - suitable for power and final surface grinding of medium to large workpieces. Pole spacing: 4mm steel, 1mm brass, large pole spacing approx. 42mm. Poling: transverse (longitudinal can be supplied on request) Supplied including stop rails. Easy control through the control unit (must be purchased). It is also possible to perform automatic demagnetization via the control unit. Voltage: 110V (DC) Usage - Power sanding, large-scale final sanding. Package includes: Clamp with cable (standard 6m), set of clamps, user manual. We provide full warranty and post-warranty service for the magnet. Cat. no. : BJP If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Electric magnet with unique waterproof/waterproof construction, oval pole with epoxy filling and multiple protection against spillage. Size: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Nominal clamping force: 130N/cm2 - suitable for power and final surface grinding of medium to large workpieces. Pole pitch: T48mm Insulation between the individual poles is made of hardened epoxy resin. Supplied including stop rails. The pole plate is made from one piece of steel. The body is made of one piece of steel, the coils are completely covered in epoxy, a high-quality galvanized foil between the body and the pole plate of the magnet. Easy control through the control unit. Voltage: 110V (DC) Usage - Power sanding, large-scale final sanding. Package includes: Clamp with cable (standard 6m), set of clamps, user manual. We provide full warranty and post-warranty service for the magnet. Cat. no. : ELMG We are able to customize the magnets to order - for example: * Finish the guide grooves for the guide stones * Cut the threads for fixing the vise * Mill T-slots for T-nuts * Supply additional stop rails, or adjust according to requirements. * Mill beds for series production - all this and more according to your requirements If you are not sure about the choice - you don't know which magnet is suitable for your work, contact us, we will be happy to help!

Control units are used for power supply and safe control of electromagnetic clamps. They enable adjustment of the clamping force and automatic demagnetization of both the magnet and the workpieces. Each unit is equipped with a safety contact that blocks the start of the machine if the clamp is not on or sufficiently magnetized. We supply the units in a metal case as standard, optionally they can also be supplied as a control panel for direct assembly into the control unit of the (IP00) machine. Used to power and control 110 VDC electromagnetic clamps. Power supply 200-230V, or we can supply 380-460V or 110V, 50/60Hz. Advantages: - Operator safety - the machine will not start at low clamping force - Variable clamping force - control of clamping force for greater precision and cooler operation - Demagnetization of both the clamp and the workpiece for easy removal - They enable remote control of the clamps - The possibility of controlling up to 4 magnets simultaneously Important parameters: - The possibility of continuous adjustment clamping forces - Possibility of connection with the PLC of the machine - Control using the cable remote control U19 - see the attached photo - Networking support - connection of several control units and clamps in large assemblies - Current transformer for checking the magnetization of current - Power voltage control - IEC standard in accordance with the European Machinery Regulation 2006/42/EC - Extension of the control panel for installation in the machine - Safety contact - at low clamping force the machine does not turn on Functions: Control units of electromagnetic clamps js ou an essential part of them, becaus

Control units are used for power supply and safe control of electromagnetic clamps. They enable adjustment of the clamping force and automatic demagnetization of both the magnet and the workpieces. Each unit is equipped with a safety contact that blocks the start of the machine if the clamp is not on or sufficiently magnetized. We supply the units in a metal case as standard, optionally they can also be supplied as a control panel for direct assembly into the control unit of the (IP00) machine. Used to power and control 110 VDC electromagnetic clamps. Power supply 200-230V, or we can supply 380-460V or 110V, 50/60Hz. Advantages: - Operator safety - the machine will not start at low clamping force - Variable clamping force - control of clamping force for greater precision and cooler operation - Demagnetization of both the clamp and the workpiece for easy removal - They enable remote control of the clamps - The possibility of controlling up to 4 magnets simultaneously Important parameters: - The possibility of continuous adjustment clamping forces - Possibility of connection with the PLC of the machine - Control using the cable remote control U19 - see the attached photo - Networking support - connection of several control units and clamps in large assemblies - Current transformer for checking the magnetization of current - Power voltage control - IEC standard in accordance with the European Machinery Regulation 2006/42/EC - Extension of the control panel for installation in the machine - Safety contact - at low clamping force the machine does not turn on Functions: Control units of electromagnetic clamps js ou an essential part of them, becaus

Control units are used for power supply and safe control of electromagnetic clamps. They enable adjustment of the clamping force and automatic demagnetization of both the magnet and the workpieces. Each unit is equipped with a safety contact that blocks the start of the machine if the clamp is not on or sufficiently magnetized. We supply the units in a metal case as standard, optionally they can also be supplied as a control panel for direct assembly into the control unit of the (IP00) machine. Used to power and control 110 VDC electromagnetic clamps. Power supply 200-230V, or we can supply 380-460V or 110V, 50/60Hz. Advantages: - Operator safety - the machine will not start at low clamping force - Variable clamping force - control of clamping force for greater precision and cooler operation - Demagnetization of both the clamp and the workpiece for easy removal - They enable remote control of the clamps - The possibility of controlling up to 4 magnets simultaneously Important parameters: - The possibility of continuous adjustment clamping forces - Possibility of connection with the PLC of the machine - Control using the cable remote control U19 - see the attached photo - Networking support - connection of several control units and clamps in large assemblies - Current transformer for checking the magnetization of current - Power voltage control - IEC standard in accordance with the European Machinery Regulation 2006/42/EC - Extension of the control panel for installation in the machine - Safety contact - at low clamping force the machine does not turn on Functions: Control units of electromagnetic clamps js ou an essential part of them, becaus

Control units are used for power supply and safe control of electromagnetic clamps. They enable adjustment of the clamping force and automatic demagnetization of both the magnet and the workpieces. Each unit is equipped with a safety contact that blocks the start of the machine if the clamp is not on or sufficiently magnetized. We supply the units in a metal case as standard, optionally they can also be supplied as a control panel for direct assembly into the control unit of the (IP00) machine. Used to power and control 110 VDC electromagnetic clamps. Power supply 200-230V, or we can supply 380-460V or 110V, 50/60Hz. Advantages: - Operator safety - the machine will not start at low clamping force - Variable clamping force - control of clamping force for greater precision and cooler operation - Demagnetization of both the clamp and the workpiece for easy removal - They enable remote control of the clamps - The possibility of controlling up to 4 magnets simultaneously Important parameters: - The possibility of continuous adjustment clamping forces - Possibility of connection with the PLC of the machine - Control using the cable remote control U19 - see the attached photo - Networking support - connection of several control units and clamps in large assemblies - Current transformer for checking the magnetization of current - Power voltage control - IEC standard in accordance with the European Machinery Regulation 2006/42/EC - Extension of the control panel for installation in the machine - Safety contact - at low clamping force the machine does not turn on Functions: Control units of electromagnetic clamps js ou an essential part of them, becaus