Electromagnetic chuck 400x2000 mm for force grinding 130N / cm2, Elmag Compact
| 500x300mm |
On request
|
2.342,66 € with VAT |
| 600x200mm |
On request
|
2.085,13 € with VAT |
| 600x300mm |
On request
|
2.783,30 € with VAT |
| 600x400mm |
On request
|
3.363,46 € with VAT |
| 600x500mm |
On request
|
3.987,14 € with VAT |
| 700x400mm |
On request
|
3.735,83 € with VAT |
| 800x300mm |
On request
|
3.363,46 € with VAT |
| 800x400mm |
On request
|
4.104,09 € with VAT |
| 800x500mm |
On request
|
4.871,59 € with VAT |
| 1000x200mm |
On request
|
2.989,11 € with VAT |
| 1000x250mm |
On request
|
3.503,75 € with VAT |
| 1000x300mm |
On request
|
3.987,14 € with VAT |
| 1000x400mm |
On request
|
4.871,59 € with VAT |
| 1000x500mm |
On request
|
5.145,61 € with VAT |
| 1000x600mm |
On request
|
6.174,76 € with VAT |
| 1500x300mm |
On request
|
5.236,20 € with VAT |
| 1500x400mm |
On request
|
6.174,76 € with VAT |
| 1500x500mm |
On request
|
7.718,51 € with VAT |
| 1500x600mm |
On request
|
9.262,05 € with VAT |
| 2000x400mm |
On request
|
8.233,02 € with VAT |
| 2000x500mm |
On request
|
11.599,64 € with VAT |
| 2000x600mm |
On request
|
13.919,54 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000432718
- Brand:
- ČR
- Warranty:
- 24 months
- Code:
- ELMG400x2000
Product information
Magnet width: 400mm
Magnet length: 2000mm
Magnet height: 80mm
Nominal clamping force: 130N / cm2 - suitable for force  © and final surface grinding of medium- sized to large workpieces.
Saw spacing: T48mm
Insulation between individual poles is made of a filling of hardened epoxy resin.
Supplied with stop rails.
Minimum workpiece size: 22x144x48 mm
Magnet regrinding limit: 8 mm
Power cable length: 6m
Saw blade is made of one piece of steel. The body is made of one piece of steel, the coils are completely encapsulated in epoxy, a high-quality galvanized foil between the body and the saw blade of the magnet.
Easy control through the control unit.
Voltage: 110V(DC)
Application - Power grinding, large area final grinding.
SouÄ The package includes: Clamp with cable(standard 6m), set of clamps, operating instructions.
We provide a full warranty and post-warranty service for the magnet.
Cat.No. : ELMG4002000
We are able to customize the magnets in any way - for example. :
* Supply guide grooves for guide stones
* Cut threads to fasten the vice
* Cut T-slots for T-nuts
* Add additional stop rails, possibly adjust as required.
* Cut out a bed for series production
- all the more according to your requirements
If you are not sure about your choice - you do not know what magnet is suitable for your work, contact us, we will be happy to help!
Variants
Accessories
-
Lamellar prismatic block for magnetic clamps 60x48x110mm VCP-3
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 60mm Height: 48mm Length: 110mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped on to the classical surface of a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-403
In stock70,33 € with VAT -
Set of lamella blocks for magnetic clamps, VCP-6
Set contains 8 pcs of lamellar magnetic blocks of the following dimensions: 2x flat 46x60x15, pole pitch 2 2,5mm 4x flat 50x100x25, pole pitch 2,5 3mm 2x with double V-groove 9 and 18mm , 57x49x46, pole pitch 3,5 3,5mm Suitable for permanent magnets and electromagnets. Laminar prismatic blocks allow you to create an optimal clamping surface for workpieces that can not be clamped onto the classical surface of a magnetic clamping plate for their shape. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Obj. No. 2015-410
In stock256,17 € with VAT -
Lamellar block(2pcs) for magnetic clamps 50x25x100mm, VCP-1
Lamel Magnetic Block Polar Pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 50mm Height: 25mm Lenght: 100mm Lamellar Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to the classical surface of a magnetic clamping plate . It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-401
In stock62,40 € with VAT -
Lamellar prismatic block(2pcs) for magnetic clamps 58x45x51mm, VCP-2
Lamellar prism magnetic block Poles pitch: 2,5 3mm Suitable for permanent magnets and electromagnets. Width: 58mm Height: 45mm Lenght: 51mm Laminar Prismatic Blocks allow you to create an optimal clamping surface for workpieces that can not be clamped to their classical surface by a magnetic clamp plates. It also serves to direct the magnetic field into the workpiece, especially in cases where the existing magnetic field of the clamp is not suitable for the workpiece. Another benefit is the possibility of additional machining (machining) of this block for differently shaped workpieces. Ref. No. 2015-402
In stock62,28 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!