Eccentric case for broaching holders with 32mm shank, B-50

Trimming knife / holder for CNC for trimming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: 45 to 70mm Face diameter: 37mm Minimum hole diameter: 45mm Depth of cut: 140mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for grooving, square and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: 37 to 45mm Face diameter: 35mm Minimum hole diameter: 37mm Depth of cut: 126mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for grooving, square and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: 17 to 28mm Face diameter: 15mm Minimum hole diameter: 17mm Depth of cut: 56mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for grooving, square and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: 28 to 37mm Face diameter: 25mm Minimum hole diameter: 28mm Depth of cut: 86mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for grooving, square and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Slotting knife / holder for CNC For slotting width / insert sizes: 18mm to 25mm Face diameter: 40mm Minimum hole diameter: 45mm Depth slotting: 140mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting machine / holder for CNC For slotting width / insert sizes: 14mm and 16mm Face diameter: 35mm Minimum hole diameter: 37mm Depth slotting: 180mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting machine / holder for CNC For slotting width / insert sizes: 14mm and 16mm Face diameter: 35mm Minimum hole diameter: 37mm Depth slotting: 126mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed data sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting knife / holder for CNC For slotting width / insert sizes: 18mm to 25mm Face diameter: 40mm Minimum hole diameter: 45mm Depth slotting: 200mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 8 to 10mm Face diameter: 7.25mm Minimum hole diameter: 8mm Depth of cut: 30mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 10 to 13mm Face diameter: 8.6mm Minimum hole diameter: 10mm Depth of cut: 40mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 13 to 16mm Face diameter: 12mm Minimum hole diameter: 13mm Depth of cut: 50mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 16 to 19mm Face diameter: 15mm Minimum hole diameter: 16mm Depth of cut: 52mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 37 to 50mm Face diameter: 35mm Minimum hole diameter: 27mm Depth of cut: 140mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 27 to 37mm Face diameter: 25mm Minimum hole diameter: 27mm Depth of cut: 100mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming squares / square profiles / quads / 4hr. For squares of sizes: 19 to 27mm Face diameter: 18.5mm Minimum hole diameter: 19mm Depth of cut: 86mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a design for grooving, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: 9 to 11mm Face diameter: 8mm Minimum hole diameter: 9mm Depth of cut: 30mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for grooving, square and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Trimming knife / holder for CNC for trimming hexagons / hexagonal profiles / hexagons, 6hr. For hexagons of size: 11 to 17mm Face diameter: 10mm Minimum hole diameter: 11mm Depth of cut: 40mm Shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for grooving, square and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM, carbide on request.

Slotting cutter / holder for CNC For slotting width / insert size: 2mm Face diameter: 6mm Minimum hole diameter: 7mm Cutting depth: 34.5mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 2mm Face diameter: 6mm Minimum hole diameter: 7mm Cutting depth: 25mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting knife / holder for CNC For slot width / insert size: 3mm Face diameter: 8mm Minimum hole diameter: 8.7mm Depth slotting: 30mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 4mm Face diameter: 10mm Minimum hole diameter: 11mm Cutting depth: 40mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting knife / holder for CNC For slot width / insert size: 3mm Face diameter: 8mm Minimum hole diameter: 8.7mm Depth slotting: 40mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 5mm Face diameter: 12mm Minimum hole diameter: 13mm Cutting depth: 46mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 5mm Face diameter: 12mm Minimum hole diameter: 13mm Cutting depth: 66mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 4mm Face diameter: 10mm Minimum hole diameter: 11mm Cutting depth: 56mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 6mm Face diameter: 16mm Minimum hole diameter: 17mm Cutting depth: 56mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 6mm Face diameter: 16mm Minimum hole diameter: 17mm Cutting depth: 81mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 68mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting knife / holder for CNC For slot width / insert size: 8mm Face diameter: 20mm Minimum hole diameter: 21.5mm Depth slotting: 100mm Shank diameter: 32mm Shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 10mm Face diameter: 25mm Minimum hole diameter: 28mm Cutting depth: 126mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 10mm Face diameter: 25mm Minimum hole diameter: 28mm Cutting depth: 86mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 12mm Face diameter: 30mm Minimum hole diameter: 32mm Cutting depth: 104mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.

Slotting cutter / holder for CNC For slotting width / insert size: 12mm Face diameter: 30mm Minimum hole diameter: 32mm Cutting depth: 161mm Clamping shank diameter: 32mm Clamping shank length: 100mm Other dimensions - see enclosed catalog sheet. The holder is made of heat treated hardened steel. An eccentric sleeve can be purchased with the holder, with which it is very easy to fine-tune the offset of the knife edge, which is ideal when the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of turning the housing (on the scale) by 0.5 mm on both sides. We can also supply these holders in a version for slotting square, hexagonal and spline( multi-groove) profiles - see the enclosed catalog sheet. The holder is delivered without an insert, these are purchased separately - you will find them in related products or in the enclosed catalog sheet. We can offer inserts made of sintered steel HSSE-PM or carbide.