/ Registration
Not sure? tel: +420 602 716 471 e-mail: objednavky@kovonastroje.cz
CZ SK EN DE
Homepage ...
Metalworking tools
Turning Dead and live centers Fixed Driving fixed front tip MK5, type 8410, BISON

Driving fixed front tip MK5, type 8410, BISON
Variant:
On request
415,26 € with VAT
40mm
On request
470,73 € with VAT
50mm
On request
549,49 € with VAT
63mm
On request
705,36 € with VAT

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

Brand:
BISON
Warranty:
24 months

Product information

Hydraulic turning tip with face tips

Tip diameter: according to the selected variant
Clamping cone: morse 5

Other dimensions - see enclosed catalog sheet

Variants

Code: 8410-27-5L
On request
415,26 € with VAT
40mm
Code: 8410-40-5L
On request
470,73 € with VAT
50mm
Code: 8410-50-5L
On request
549,49 € with VAT
63mm
Code: 8410-63-5L
On request
705,36 € with VAT

Accessories

  • MK4 swivel tip with carbide tip

    MK4 swivel tip with carbide tip

    Morse 4 Taper Cone (MK IV), Carbide Tip Angle of Tip: 60 ° Tip Diameter: 32mm Tip Length: 35mm Diameter Body Diameter: 60mm Length of Taper Morse MK4: 110mm Overall length: 206mm Number of bearings: 3 Max. rpm: 3200 rpm Max. order. Load: 3200N (320kg) Accuracy 0.015mm

    In stock
    51,78 € with VAT

  • Fixed tip MK4 60° with carbide tip, CSN 243311

    Fixed tip MK4 60° with carbide tip, CSN 243311

    Fixing tip MK 4 with a 60 ° top angle and a sintered carbide insert. ČSN 24 3311 - d = 30 mm L = 160 mm l = 52 mm V - max. Circumferential runout = 0.003 mm Q - max - workpiece weight = 450 kg

    In stock
    100,60 € with VAT

  • Clamping fixed tip flattened MK4 60° carbide CSN 243317

    Clamping fixed tip flattened MK4 60° carbide CSN 243317

    Clamping pin fixed flat MK 4 with an angle of 60 ° and a sintered carbide insert. . ČSN 24 3317 - d = d = 30 mm L = 160 mm l = 51 mm V - max. Circumferential runout = 0,003 mm Q - max - workpiece weight = 1000 kg

    In stock
    95,81 € with VAT

  • Fixed tip MK4 60°, CSN 243310

    Fixed tip MK4 60°, CSN 243310

    Fixing tip fixed MK 4 with a 60 ° angle. The whole tip is hardened to a hardness of HRC 58 to 62. ČSN 24 3310 d = d = 30 mm L = 160 mm l = 57,5 ??mm V - max circumferential runout = 0,003 mm Q - max - workpiece weight = 1000 kg

    In stock
    57,58 € with VAT

  • Swivel tip MK4, 3 bearings

    Swivel tip MK4, 3 bearings

    Morse 4 Clamping Taper (MK IV) Angle of Tip: 60 ° Tip Diameter: 32mm Tip Length 37mm Body Diameter: 60mm Length of Taper MK4: Overall length 200mm Number of bearings: 3 Volt speed according to Fig. 2 Max. Circular runout: 0,01mm Max. radial load: 3200N (320kg) The tip is detachable - front and rear

    In stock
    34,49 € with VAT

  • Rotating tip MK4 with extended tip

    Rotating tip MK4 with extended tip

    Morse 4 Clamping Cone (MK IV) Angle of Tip: 60 ° Tip Diameter: 15 / 28mm Tip Length: 27mm Diameter Body Tip: 62mm Length of MK4 Cone Morse : 110mm Overall length: 215mm Number of bearings: 2 Max. rpm: 3800 rpm Max. load: 500kg

    In stock
    53,09 € with VAT

  • MK4 swivel tip with interchangeable attachments

    MK4 swivel tip with interchangeable attachments

    Kit contains: Bracket for MK4 Toggle Keys 6pcs Wrench Extensions have Diameters / Lengths: 28 / 17mm; 28 / 22mm; 28 / 28mm; 26 / 37mm (with carbide tips); 55 / 22mm (opposite cone) The kit is delivered in a plastic case

    In stock
    136,21 € with VAT

Alternatives

  • Fixed driving tip MK4 - 32mm, VDK-32-MT4

    Fixed driving tip MK4 - 32mm, VDK-32-MT4

    Mortar Taper Pin 4, ie MK4 for Wood, Plastic, etc. Centering Spindle Diameter: 8mm Diameter of Drilling Part: 32mm Number of Teeth: 8 For clamping the workpiece between spikes , clamped into the lathe spindle directly or through the reduction sleeve. A rotary tip is suitable for the tailstock pin. Before the workpiece is clamped, it is necessary to drill the centering pins first.

    In stock
    160,72 € with VAT

  • Fixed driving tip MK4 - 23mm, VDK-23-MT4

    Fixed driving tip MK4 - 23mm, VDK-23-MT4

    Morse Taper Pin 4, ie MK4 for Wood, Plastic, etc. Centering Tip Diameter: 8mm Diameter of Drilling Part: 23mm Number of Teeth: 6 For clamping the workpiece between spikes , clamped into the lathe spindle directly or through the reduction sleeve. A rotary tip is suitable for the tailstock pin. Before the workpiece is clamped, it is necessary to drill the centering pins first.

    In stock
    169,36 € with VAT

Do you need advice?

Jakub Novák, Orders

How do customers see us?

Certified customer, 30.October 2024
"vše OK"
Certified customer, 26.October 2024
"Dobrá cena, vše ok."

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!