Drilling insert 39mm 132° HSSE-PM for steel, stainless steel and cast iron, Karnasch
| 9,5 mm |
On request
|
31,25 € with VAT |
| 10,0 mm |
On request
|
31,25 € with VAT |
| 10,2 mm |
On request
|
31,25 € with VAT |
| 10,5 mm |
On request
|
31,25 € with VAT |
| 10,8 mm |
On request
|
31,25 € with VAT |
| 11,0 mm |
On request
|
31,25 € with VAT |
| 10,5 mm |
On request
|
31,25 € with VAT |
| 12,0 mm |
On request
|
31,25 € with VAT |
| 12,5 mm |
On request
|
31,25 € with VAT |
| 13,0 mm |
On request
|
35,60 € with VAT |
| 13,5 mm |
On request
|
35,60 € with VAT |
| 14,0 mm |
On request
|
35,60 € with VAT |
| 14,5 mm |
On request
|
35,60 € with VAT |
| 15,0 mm |
On request
|
35,60 € with VAT |
| 15,5 mm |
On request
|
35,60 € with VAT |
| 16,0 mm |
On request
|
35,60 € with VAT |
| 16,5 mm |
On request
|
35,60 € with VAT |
| 17,0 mm |
On request
|
35,60 € with VAT |
|
In stock
(1x)
|
43,52 € with VAT | |
| 17,5 mm |
On request
|
35,60 € with VAT |
| 18,0 mm |
On request
|
45,27 € with VAT |
| 18,5 mm |
On request
|
45,27 € with VAT |
| 19,0 mm |
On request
|
44,08 € with VAT |
| 19,5 mm |
On request
|
45,27 € with VAT |
| 20,0 mm |
On request
|
46,79 € with VAT |
| 20,5 mm |
On request
|
45,27 € with VAT |
| 21,0 mm |
On request
|
46,79 € with VAT |
| 22,0 mm |
On request
|
48,51 € with VAT |
| 23,0 mm |
On request
|
45,27 € with VAT |
| 24,0 mm |
On request
|
45,27 € with VAT |
| 25,0 mm |
On request
|
53,01 € with VAT |
| 26,0 mm |
On request
|
53,01 € with VAT |
| 26,5 mm |
On request
|
51,98 € with VAT |
| 27,0 mm |
On request
|
52,31 € with VAT |
| 28,0 mm |
On request
|
53,01 € with VAT |
| 29,0 mm |
On request
|
50,65 € with VAT |
| 30,0 mm |
On request
|
53,01 € with VAT |
| 31,0 mm |
On request
|
53,01 € with VAT |
| 32,0 mm |
On request
|
53,01 € with VAT |
| 33,0 mm |
On request
|
53,01 € with VAT |
| 34,0 mm |
On request
|
53,01 € with VAT |
| 35,0 mm |
On request
|
53,01 € with VAT |
| 36,0 mm |
On request
|
72,62 € with VAT |
| 37,0 mm |
On request
|
72,62 € with VAT |
| 38,0 mm |
On request
|
72,62 € with VAT |
| 39,0 mm |
On request
|
72,62 € with VAT |
| 40,0 mm |
On request
|
69,67 € with VAT |
| 41,0 mm |
On request
|
72,62 € with VAT |
| 42,0 mm |
On request
|
72,62 € with VAT |
| 43,0 mm |
On request
|
72,62 € with VAT |
| 44,0 mm |
On request
|
72,62 € with VAT |
| 45,0 mm |
On request
|
72,62 € with VAT |
| 46,0 mm |
On request
|
72,62 € with VAT |
| 47,0 mm |
On request
|
73,01 € with VAT |
| 48,0 mm |
On request
|
103,98 € with VAT |
| 49,0 mm |
On request
|
103,98 € with VAT |
| 50,0 mm |
On request
|
103,98 € with VAT |
| 51,0 mm |
On request
|
103,98 € with VAT |
| 52,0 mm |
On request
|
103,98 € with VAT |
| 53,0 mm |
On request
|
103,98 € with VAT |
| 54,0 mm |
On request
|
103,98 € with VAT |
| 55,0 mm |
On request
|
103,98 € with VAT |
| 56,0 mm |
On request
|
103,98 € with VAT |
| 57,0 mm |
On request
|
103,98 € with VAT |
| 58,0 mm |
On request
|
103,98 € with VAT |
| 59,0 mm |
On request
|
103,98 € with VAT |
| 60,0 mm |
On request
|
103,98 € with VAT |
| 61,0 mm |
On request
|
103,98 € with VAT |
| 62,0 mm |
On request
|
103,98 € with VAT |
| 63,0 mm |
On request
|
103,98 € with VAT |
| 64,0 mm |
On request
|
103,98 € with VAT |
| 65,0 mm |
On request
|
103,98 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000407174
- Brand:
- Karnasch - Germany
- Warranty:
- 24 months
- Code:
- 22.2010.0390
Product information
For drilling diameter: 39.0mm
Top angle: 132°
Material: baked powder steel 25 with coating
Perfect economic replacement for classic HSS drills, now with excellent performance, improved buckle removal geometry, higher strength and longer life.
Application:
Steel with strength up to 1400 MPa
Stainless steel with strength over 900 MPa
Gray cast iron
Hardox, Hastelly, Inconel, Nimonic and similar materials
Perfect economic replacement for classic HSS drills, now with excellent performance, improved chip removal geometry, higher strength and longer Lifetime.
Application:
Steel with strength up to 1400 MPa
Stainless steel with strength over 900 MPa
Gray cast iron
Hardox, Hastelly, Inconel, Nimonic and similar materials
We recommend using stainless steel inserts for drills / milling machines and lathes without numerical control(without NC). Due to their higher toughness, they can withstand worse treatment(than carbides) and do not suffer so much.
Carbide inserts are ideal for machines with numerical control(NC), but they can also be used on classic machines without NC - you just need to keep in mind that any Vibration during vibrations(loose spindle, low machine stiffness) can cause premature damage / breakage. Contact the Company: Cat. No. : 2220100390
Variants
Accessories
-
Drill with cylindrical shank DIN1835B with helical groove, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 22100
from 153,56 € with VAT -
ISO296 taper shank drill with helical groove, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable coolant plates and rings are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221030
from 160,34 € with VAT -
ISO296 taper shank drill with straight slot, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221040
from 149,40 € with VAT -
Drill with cylindrical shank DIN1835B with straight slot, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No .: 22.1020
from 3,19 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!