Drill sets

Set of 5 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 4 / 5 / 6 / 8 / 10 mm Drill length: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283054005

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 19 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-10.0mm x 0.5mm Length of the drill: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly even hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057019

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 24 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-10.5mm x 0.5mm drill bits 3.3 / 4.2 / 6.8 / 10.2 mm Drill length: Short series - lengths see attached photo Material: HSSE - High speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly also hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057024

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 25 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-13.0mm x 0.5mm Length of the drill: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly even hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057025

Set of 5 pcs multi-purpose right-cut ground twist drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 4 / 5 / 6 / 8 / 10 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill the hole with a smaller average. Perfect for tapping Cat. no.: 283064005

Set of 24 pcs multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip The set includes drills: 1.0-10.5mm x 0.5mm drills 3.3 / 4, 2 / 6.8 / 10.2 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping Cat. no.: 283064024

Set of 81 pcs of ground cobalt spiral drills for metal with reinforced core 2.0-10.0 mm Top angle: 128  ° special cut according to DIN 1412, shape C( for heavy-duty machining of stainless steels and special materials) Helix angle: 35-40  ° Material: HSS Co5(5 o5) Standard: DIN338 GT100(replaces PN 2907 T1000) Cobalt tungsten-molybdenum steel with very good cutting properties, hardness at elevated temperatures and toughness, suitable for heavy Highly machinable materials. Plastic order with cover. Application: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolling mill rolls, steel for cementing and tempering Compared to the "RTi" profile, these drills have an even stronger core and the helix is ??â € ‹â €‹ denser. High rigidity during drilling, for material forming a brittle chip and material with high strength - tough.

Set of 10 HSS drills for metal, drills with fitted / reduced cylindrical shank Drills: 14; 15; 15.5; 16; 17; 17.5; 18; 19; 19.5; 20 mm Clamp shank: 13mm Packed in a metal case Standard: DIN338, HSS-GK, type N

Set of 24pcs of spiked drills in metal with reinforced core 1,0-10,5 mm (0,5mm) drills under threads 3,3-4,2-6,8-10,2-10,5mm < br> 333847024

Set of 19pcs of helical spiral drills with reinforced core 1,0-10,0 mm > Helix angle: 36 ° Material: HSS Product code 333847519

Helix angle: 36 ° Material: HSS Product code 33847525

Set of 25 pcs of ground cobalt twist drills with reinforced core 1.0-13.0 mm From a diameter of 2 mm there are drills with a undercut for machining steel The set contains drills of 0.5 mm Helix angle: 36° Material: HSSCo5 Product code 33847525