Drill 56.0-65.0mm 14xD with taper shank ISO296 with straight groove, Karnasch
| 9,5-11,0 mm 3xD |
On request
|
149,40 € with VAT |
| 11,5-12,5 mm 2,5xD |
On request
|
150,19 € with VAT |
| 13,0-15,0 mm 2,5xD |
On request
|
162,08 € with VAT |
| 15,5-17,5 mm 2xD |
On request
|
161,22 € with VAT |
| 18,0-21,0 mm 3xD |
On request
|
172,87 € with VAT |
| 22,0-24,0 mm 3xD |
On request
|
177,56 € with VAT |
| 25,0-29,0 mm 3xD |
On request
|
209,87 € with VAT |
| 30,0-35,0 mm 2,5xD |
On request
|
212,67 € with VAT |
| 36,0-41,0 mm 3xD |
On request
|
282,03 € with VAT |
| 36,0-41,0 mm 8,5xD |
On request
|
527,16 € with VAT |
| 36,0-41,0 mm 13xD |
On request
|
771,79 € with VAT |
| 36,0-41,0 mm 19xD |
On request
|
1.003,30 € with VAT |
| 42,0-47,0 mm 2,5xD |
On request
|
282,03 € with VAT |
| 42,0-47,0 mm 7,5xD |
On request
|
549,52 € with VAT |
| 42,0-47,0 mm 12xD |
On request
|
771,79 € with VAT |
| 42,0-47,0 mm 19xD |
On request
|
1.003,30 € with VAT |
| 48,0-55,0 mm 2,5xD |
On request
|
322,09 € with VAT |
| 48,0-55,0 mm 7,5xD |
On request
|
703,78 € with VAT |
| 48,0-55,0 mm 11xD |
On request
|
950,85 € with VAT |
| 48,0-55,0 mm 18xD |
On request
|
1.188,81 € with VAT |
| 56,0-65,0 mm 2xD |
On request
|
322,09 € with VAT |
| 56,0-65,0 mm 6,5xD |
On request
|
703,78 € with VAT |
| 56,0-65,0 mm 10xD |
On request
|
950,85 € with VAT |
| 56,0-65,0 mm 14xD |
On request
|
1.188,81 € with VAT |
| 64,0-76,0 mm 2xD |
On request
|
426,49 € with VAT |
| 64,0-76,0 mm 6xD |
On request
|
773,08 € with VAT |
| 64,0-76,0 mm 8,5xD |
On request
|
1.005,23 € with VAT |
| 64,0-76,0 mm 12xD |
On request
|
1.256,60 € with VAT |
| 78,0-88,0 mm 2xD |
On request
|
426,49 € with VAT |
| 78,0-88,0 mm 5xD |
On request
|
773,08 € with VAT |
| 78,0-88,0 mm 8,5xD |
On request
|
1.005,23 € with VAT |
| 78,0-88,0 mm 10xD |
On request
|
1.256,60 € with VAT |
| 90,0-100,0 mm 2xD |
On request
|
678,21 € with VAT |
| 90,0-100,0 mm 5,5xD |
On request
|
1.110,28 € with VAT |
| 90,0-100,0 mm 7xD |
On request
|
1.384,51 € with VAT |
| 90,0-100,0 mm 9,5xD |
On request
|
1.730,66 € with VAT |
| 102,0-114,0 mm 5xD |
On request
|
1.110,28 € with VAT |
| 102,0-114,0 mm 6xD |
On request
|
1.384,51 € with VAT |
| 102,0-114,0 mm 8xD |
On request
|
1.730,66 € with VAT |
| 102,0-114,0 mm 1,5xD |
On request
|
678,21 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000406689
- Brand:
- Karnasch - Germany
- Warranty:
- 24 months
- Code:
- 22.1040.08790.0560
Product information
Drilling range: 56.0 to 65.0 mm
Drilling depth Â!NAf: 879,0mm
Clamping shank: MK5
Other measures - see attached data sheet
Standard: ISO296 type BEK
Drill bit - use of a drill bit on a lathe and on all machines where the workpiece rotates and the drill bit stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines. and on lathe / NC.
The package includes a holder, 2x clamping screw and 1x torx key.
Interchangeable inserts are purchased separately - see section "Related products"
Karnasch manufactures inserts from both carbide and stainless steel. It is therefore used both for NC(with carbide insert) and for conventional machines without numerical control(with stainless steel insert).
Of course, carbide inserts can also be used with classic machines, only it is necessary to remember that possible vibrations(free spindle, low rigidity of the system / machine, etc. .) may cause premature damage / breakage of the carbide insert. Baked steel is tougher and can withstand worse treatment. Contact the Company: Cat. A „. : 22 1040 08790 0560
Variants
Accessories
-
Drilling insert HSSE-PM 132° for steel, stainless steel and cast iron, Karnasch
Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Steel with strength up to 1365 MPa Stainless steel with strength above 900 MPa Cast iron up to 400HBW strength Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. No. : 22 2010
from 31,25 € with VAT -
Carbide drill insert 132 ° for stainless, hard and hardened steel, Karnasch
Carbide replaceable insert for Karnasch drill - see related products For drilling the diameter: according to the selected variant Apex angle: 132° Material: carbide 20/30 with Steel-Tec coating Usage : Steel with strength up to 1400 MPa Stainless steel with strength above 900 MPa Gray cast iron Hardox, Hastelly, Inconel, Nimonic and similar materials Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 4010
from 36,84 € with VAT -
Drilling insert HSSE-PM 132° for non-ferrous materials, Karnasch
Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with Alu-Tec coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Aluminium, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 3010
from 8,12 € with VAT -
Carbide drill insert 132° for cast iron, inconel and titanium, Karnasch
Carbide replaceable insert for Karnasch drill - see related products For diameter drilling: according to the selected variant Apex angle: 132° Material: carbide 20/30 with coating Steel-Tec Usage : All types of cast iron Refractory alloys and special stainless steels Hastelloy, Inconel, titanium alloys Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think that possible shaking / vibration during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 4510
13,12 € with VAT -
Drilling insert HSSE-PM 144° for non-ferrous materials, Karnasch
Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 144° Material: sintered powder steel 15 with Alu-Tec coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Aluminium, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 3510
from 7,90 € with VAT -
Carbide drill insert 132° for non-ferrous materials, Karnasch
Carbide replaceable insert for Karnasch drill - see related products For diameter drilling: according to the selected variant Apex angle: 132° Material: carbide 20/30 with coating Alu-Tec Usage : Aluminum, brass, copper, bronze and other non-ferrous metals Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think that possible shaking / vibration during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 5010
from 16,09 € with VAT -
Carbide drill insert 132° for abrasive materials, Karnasch
Carbide replaceable insert for Karnasch drill - see related products For diameter drilling: according to the selected variant Apex angle: 132° Material: carbide 20/30 with coating Dia-Tec Usage : Plexiglass, carbon materials (GFK, CFK), graphite, etc. Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think that possible shaking / vibration during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 5510
Price - On request -
Locking rod for Karnasch oil rings
Rod preventing the movement of the lubrication ring For Karnasch lubrication rings in the range: according to the selected variant Other measures - see the attached catalog sheet Suitable for Karnasch grease rings - see related products Cat. no.: 2290020
Price - On request
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!