DNMG

Blade DNMG 150608 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 3308095

Turning insert VBD DNMG 110408 PP IC830 Radius 0,8mm Up. hole - diameter: 3,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type PP: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DNMG 110404 NF IC830 Radius 0,4mm Up. hole - diameter: 3,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type NF: Suitable for routine and finishing operations. Catalog number 03308123 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DNMG 110408 NF IC830 Radius 0,8mm Up. hole - diameter: 3,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for break Cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type NF: Suitable for routine and finishing operations. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Blade DNMG 150412 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 3308180

DNMS 150408 - 12 IC20 Radius 0,8mm Coating: uncoated IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Standard conditions - see attached photo Typ 12: Single-sided 80 ° plate with very sharp cutting edge for machining soft non-ferrous materials. Kat. No. 5500519

DNMG 110408 - PP IC10 Radius: 0,8mm Coating: uncoated IC10 Series: < br> Suitable for aluminum and non-ferrous materials. Usage: Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superslitz: S10-S30 Terms and Conditions - see attached photo Type PP: Ideal for machining very sticky materials under normal cutting conditions. Kat. No .: 5502833

Lathe insert VBD DNMG 150404 TF IC907 Radius 0.4mm Insert height: 4.76mm Coating: PVD, TiAlN TiN IC907 series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type TF: Universal use in normal cutting conditions. Suitable for carbon and alloy steels and refractory alloys Cat. no.: 5505137 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD DNMG 110408 NF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Typ NF: Suitable for common and finishing operations . Kat. No. 5505158

Lathe insert VBD DNMG 150404 TF IC9250 Radius 0.4mm Insert height: 4.76mm Coating: CVD, TiCN Al2O3 TiN IC9250 series: Solid substrate with cobalt enriched layer, MTCVD TiCN and alpha Al2O3 CVD coating. Suitable for ordinary turning of steel under various conditions - continuous and interrupted cutting, high rigidity and resistance. Usage: Steel: P10-P35 Stainless steel: M05-M20 Cutting conditions - see attached photo Type TF: Universal use for normal cutting conditions. Suitable for carbon and alloy steels and refractory alloys Cat. no.: 5507313 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DNMG 110408 PP IC9350 Radius 0,8mm Up. hole - diameter: 3,8mm Coating: CVD, TiCN alpha Al2O3 TiN IC9350 series: Very rigid substrate ts cobalt layer supplemented with MTCVD TiCN and Al2O3 coating. Excellent rigidity and resistance to wear when machining steel. Suitable for intermittent and unstable cutting conditions. / : Ideal for machining highly sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD DNMG 150404 TF IC8250 Radius 0.4mm Insert height: 4.76mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 series: Cobalt doped hard substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for general machining of steel - roughing to finishing - wide range of cutting conditions. High hardness and wear resistance of the blade. Usage: Steel: P10-P35 Stainless steel: M05-M20 Cutting conditions - see attached photo Type TF: Universal use for normal cutting conditions. Suitable for carbon and alloy steels and refractory alloys Cat. no.: 5508107 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.