Digital calipers

Digital gauge / slider / slider with flat depth gauge Scope: according to the selected variant ABS function (yes/no): depending on the selected variant Division: 0.01mm Accuracy: 0.02mm up to 130mm, 0.03mm over 130mm Extra large numbers: 12mm Glass scale - very easy scrolling = contactless movement Automatic shutdown On/off function, mm/inch switching DIN 862 Cable for data output is not part of the package - can be purchased additionally - order no. 909.448

Single-sided digital sliding gauge, without upper jaws, with ABS function Scope: according to the selected variant Length of the lower jaws: according to the selected variant Division: 0.01mm Switching inches / millimeters Possibility of setting absolute zero, ABS function The display remembers the value even after switching off.

Digital sliding gauge with upper tips with ABS function Scope: according to the selected variant Length of the lower jaws: according to the selected variant Internal measurement from a diameter of 20mm Switching inches / millimeters Possibility of setting absolute zero, ABS function The display remembers the value even after switching off.

Sliding gauge digital double-sided with fine adjustment, with upper tips for external measurement Scope: according to the selected variant Length of the lower jaws: according to the selected variant Resolution: 0.01mm Possibility of internal measurement with lower jaws from a diameter of 20mm Possibility to set ABS absolute zero Switching to inches / millimeters The display remembers the value even after switching off.

Digital gauge 150 mm / slide / slide with depth gauge with data output Accuracy: 0.02mm on lower jaws, 0.04mm on upper jaws Division: 0.01mm Four buttons. Measurement with absolute zero. Extra fine slide, finely lapped slide bar. Czech instructions attached. Each of these scales is manufactured under a unique serial number. Each piece of this slider is additionally checked before shipping with a 22.50 mm SOMET check gauge and a 37.001 Schmalkalden check ring directly at our store. The slider is not suitable for calibration: The upper tips of the slider do not meet the accuracy of DIN862, or when checked in the calibration laboratory on the standard - a 4 mm ring, an inaccuracy of 0.04 mm was measured (the standard states 0.03 mm). This is a manufacturing defect, the upper tips are ground too flat (not to a point), and this defect cannot be removed. Larger diameters (from 5mm) measure the upper tips reliably with accuracy according to the DIN862 standard. The slider is of excellent quality, high-quality electronics, the values do not jump, the slider has a very smooth movement - lapped sliding bar. We recommend it for orientation control measurements, or for every garage - where calibration is not necessary.

Digitálne mieridlo / posuvka / šuplera s hĺbkou s výstupom dát Rozsah: 0-150 mm Delenie: 0,01 mm Presnosť: 0,02 mm Vhodné per strojná výroba. Tačítka: zap/vyp, nula, mm/palec Automatické vypnutie pri dlhšej nečinnosti Batéria s dlouhou výdržou - typ CR2032 S dátovým výstupom Štandard: DIN862 Materiál: ocel

Caliper with top tips, drawer, slider Measuring range 0-76m, resolution 0.01mm, accuracy / - 0, 1mm Material: composite plastic Clear and well-readable display, included in the delivery is a battery From the back of the clip to capture the pocket emen apod.

Sliding scale with a range of 0-150mm, a 0.01mm numerical step and a flat depth gauge. Measurement in inches or millimeters. drawer, slider Length of lower arms - tips: 40mm Not suitable for calibration

Caliper digital with depth gauge, professional quality, screw locking Measuring range: 0-100mm Shoulder length: 30mm Features: * toggle mm / inch < br> Each caliper of this model has a serial number

Digital caliper with solar cell Measuring range 0-150mm With depth gauge Top and bottom Jaws Shoulder length 40mm Each caliper of this model has a serial number

Digital Scroll 150 mm Accuracy on main jaws: 0.03 mm Slide gauge in low price category is suitable for HOBBY use. For professional use, we recommend buying a higher range - Accurata.

Digital gauge 150 mm / slider / drawer with depth gauge with data output Accuracy: 0.02mm Graduation: 0.01mm < br> Extra fine sliding , finely lapped sliding bar. Each scale is manufactured under a unique serial number and meets the accuracy of DIN862 - it is possible to issue a calibration protocol on it. < / b> Automatic shutdown after 5min. Before sending, each piece of this slider is additionally checked on a control scale of 22.50 mm brand SOMET and a control ring 37,001 brand Schmalkalden directly at our store.