Dead and live centers

Replacement tip for Škoda MK6 swivel tip ČSN 243324 Diameter of the tip Dmax: 60mm Diameter of the ground cylindrical part: 55mm Diameter for the thrust bearing: 40mm Diameter for the rear bearing: 20mm Total length: 305mm Suitable for older Škoda tips with a black case. Not suitable for the Silver-line ( series type ČSN 243324M).

Spare part - tip for swivel tip MK6 A „A’SN 243324 Tip diameter Dmax: 60mm Shaft diameter for needle bearing: Diameter for thrust bearing: Diameter for rear bearing: Overall length:

Bearing 51206 for swivel tip MK5 ÄOSN 243324

3/4 "Handle Ratchet Head with GOLA Head Blade and 1/4" (6mm) Bits Square: 3/8 "(9.5mm), 6mm Hexagon Overall length: 160mm Ratchet mechanism Metal with plastic handle The swivel head allows one side to clamp the head of the head, the second bit

Clamping tip fixed MK 1 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 13.5 mm L = 85 mm l = -(this part is conical) V - max. circumferential runout = 0.003 mm Q - max- weight of the workpiece = 125 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for unlocking with a key, possibly fixing the drifting heart.

Fixed clamping point MK 2 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 13.5 mm L = 123 mm l = 50 mm V - max. circumferential throw = 0.003 mm Q - max- weight of the workpiece = 325 kg Standard: no, replacement for ČSN 243310 The tip has two flats - for opening with a key, or fixing the driving heart.

Fixed clamping point MK 2 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 19 mm L = 103 mm l = - (this part is conical) V - max .circumferential throw = 0.003 mm Q - max- workpiece weight = 325 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for unlocking with a key, or fixing the driving heart.

Fixed clamping point MK 2 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 20 mm L = 126 mm l = 50 mm V - max. circumferential throw = 0.003 mm Q - max- weight of the workpiece = 325 kg Standard: none, replacement for ČSN 243310 The tip has one flat - for fixing the driving heart.

Fixed clamping point MK 3 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 20 mm L = 135 mm l = 50 mm V - max. circumferential throw = 0.003 mm Q - max- weight of the workpiece = 650 kg Standard: none, replacement for ČSN 243310 The tip has one flat - for fixing the drift heart.

Fixed clamping point MK 4 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 20 mm L = 160 mm l = 46 mm V - max. circumferential throw = 0.003 mm Q - max- workpiece weight = 450 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for opening with a key.

Fixed clamping point MK 4 with a peak angle of 60°. The entire tip is hardened to a hardness of HRC 58 to 62. d = 33 mm L = 175 mm l = - (this part is conical) V - max .circumferential throw = 0.003 mm Q - max- weight of the workpiece = 450 kg Standard: none, replacement for ČSN 243310 The tip has two flats - for opening with a key.

Fixed MK 2 clamping tip with 60° apex angle and cemented carbide insert. ČSN 24 3311 d = 20 mm L = 100 mm l = 34 mm V - max. peripheral runout = 0.003 mm Q - max- workpiece weight = 130 kg Standard: replacement for ČSN 243317 The tip has two flats - for opening with a key.