Řezné oleje, tuky a odlučovače

Type: HM 46 - hydraulics in usual conditions (year-round operation) Volume: 10 liters - poured from a barrel Packaging: In a plastic canister with a lid Replacement for Paramo Mogul HM-46 General characteristics: Hydraulic oils are intended for use in highly loaded hydraulic systems of industrial machines and equipment, in construction, transport, agriculture, etc. Usage: Hydraulic oils are intended for power transmission in hydrostatic systems and for driving hydraulic devices, i.e. in hydraulic transmissions, control and regulation mechanisms and in other devices that work in severe working conditions (pressure up to 25 MPa in gear pumps and up to 35 MPa in piston pumps, increased ambient temperature and humidity. Standards, specifications: DIN51 524 part 2 - HLP, ISO 11 158 HM For other parameters, see the attached technical and safety sheet.

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 0,5litr = 0,5kg Recommended concentrations: Gray iron grinding: 3-4 % (3% = 33.3l of mixture, 4% = 24l of mixture) Bore: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Cutting: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Milling: 5% (5% = 19l of mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mix) against biological attack by both bacteria and fungi, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 1 l = 1 kg - plastic container with cap Recommended concentration: Home grinding cast iron: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19 l mixture) Home Turning: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Home Cutting: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 5litres = 5kg Recommended grinding: Gray iron grinding: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19l mixture) Cutting: 4-5% (4% = 24l mixture, 5% = 19l mixture) Cutting: 4-5% Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 10litres = 10kg Recommended grinding: Gray iron grinding: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19l mixture) Cutting: 4-5% (4% = 24l mixture, 5% = 19l mixture) Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Volume: 1 liter Packaging: In a plastic container / bottle with a lid (non-original packaging - spilled) Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P -53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: Oil KV 68 is primarily intended for the lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.

Volume: 5 liters Packaging: In a plastic container / canister with a lid (non-original packaging - bulk) Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P -53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: Oil KV 68 is primarily intended for the lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.

Volume: 10 liters Packaging: In a plastic container / canister with a lid (non-original packaging - bulk) Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P -53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: Oil KV 68 is primarily intended for the lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.

Volume: 205 liters Packaging: original - barrel Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P-53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: Oil KV 68 is primarily intended for the lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.

Volume: 1 liter Packaging: In a plastic container / bottle with a lid (non-original bottle - spillable) Use: For lubrication of universal chucks, sliding rotary surfaces, due to the appropriate density of the oil (KV100) this does not spray . Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P-53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: CGLP KV100 oil is primarily intended for lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.

Volume: 5 liters Packaging: In a plastic container / bottle with a lid (non-original bottle - spilled) Use: For lubrication of universal chucks, sliding rotary surfaces, due to the appropriate density of the oil (KV100) this does not spray . Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P-53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: CGLP KV100 oil is primarily intended for lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.

Volume: 10 liters Packaging: In a plastic container / bottle with a lid (non-original bottle - spillable) Use: For lubrication of universal chucks, sliding rotary surfaces, due to the appropriate density of the oil (KV100) this does not spray . Classification and specifications: ISO6743-4 (L-HG , L-G) , Cincinnati P-53 , P-47 , P-50 , DIN 51502-CGLP , DIN51524-2 Description : Oil for lubrication of sliding guides and combined lubrication systems: hydraulics - guide surfaces of machine tools. Usage: CGLP KV100 oil is primarily intended for lubrication of horizontal and vertical guide surfaces of (various design) modern machine tools, working under demanding conditions, when it effectively prevents the occurrence of jerky movements at low sliding speeds and heavy loads - the so-called "stick-slip", which disrupt the precise function of the machine. It is also used to lubricate screw gears, especially in the circulation method of lubrication, it can also be used as a lubricant for mechanical gears and less demanding hydrostatic mechanisms. This product is classified as dangerous according to CLP, see safety data sheet. Characteristics: Very well protects lubricated systems against wear; Protects against corrosion; The modified course of the coefficient of friction makes it possible to effectively prevent the occurrence of jerky movements of loaded, slow-moving lines (â^?'stick-slipâ^?~); Very good resistance to oxidation is a guarantee of a long service life; The excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even when lubricating vertical guide surfaces.