Cutters

TPCN 1603 ODT / PDT / TPCN 1603 PDSN Angle of adjustment : P (90 °) Angle of Beam: D (15 °) Cutting Edge Design: S (Rounded Edges with Facet) Feed Rate: N - Neutral - Feed Right & br> Material of slices: unknown - steel or cast iron - sale, to be tested

TPCN 1603 ODT / PDT / TPCN 1603 PDSN S20 Thickness: 03 (3.18mm) Angle Adjustment: P (90 °) Face Angle Angle: D (15 °) Cutting Edge Design: S (Rounded Edges with Facet) Feed Rate: N - Neutral - Feed Right & Left Material of slicer: S20 (uncoated) Application: Steel: P20-P30

Original Interchangeable Insert In Original Pack (Upon Taking 10pcs), According to ANSI Standard: TPCN 32PDTR Slightly Positive Face Angle Size: 16 Thickness: 03 (3.18mm) Angle of Adjustment: P (90 °) Angle of the Facet Back: D (15 °) Cutting Edge: T (Rounded Edges with Facet) Feed Rate: R - Feed Right | Slab Material: 525P Usage: Steel: P20-P30

TPCN 1603 PP U16T Thickness: 03 (3,18mm) Cutting Edge Design: Rounded edges with bevel Feed direction: neutral - feed right and left Material of slicer: K10 (uncoated) Usage: Cast iron: K10

TPCN 1603 ZZ-TR S20 Replacement Insert Angle of Adjustment: 90 ° Cutting Edge: Rounded Edges with Faceted Feed Direction: R - Feed Right Material of Squeegee: S20 (Uncoated) Usage: Steel : P20-P30

Force screw in the knife holder. Thread Size: M2,5 Head: TORX 8 Overall length of bolt (with head): 7mm

Force screw in the knife holder. Thread Size: M4 Head: TORX 15 Overall length of bolt (with head): 8,8mm

Force screw in the knife holder. Thread Size: M5 Head: TORX 20 Overall length of bolt (with head): 11mm

Force screw in the knife holder. Thread Size: M4 Head: TORX 15 Overall length (with head): 8mm

Honeycomb cutter Three-sided, non-symmetrical, for machining in three axes Material K30: for machining materials that produce a short, crumbly chip. Especially for gray cast iron, non-ferrous alloys, non-metallic materials Diameter 10mm Shank diameter: 12mm Overall length: 83mm Cutter length: 26mm

Carbide ( TK ) milling cutter for chamfering edges / cemented carbide chamfer Number of blades: 4 pcs. Diameter of the working part: 6mm, tolerance h6 Apex angle: 90° Minimum diameter of truncation: Dc: 1.0mm Total length: 50mm Helix angle: 0° Face angle: 0° Clamp shank: 6mm, tolerance h6 Standard: DIN 6535 HA Coating: PVD ( TiAlN ) Usage: Steel up to 55 HRC Low alloy steels up to 600 MPa Alloy steels up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Ductile cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Application: Cast iron: K25 Sale, in stock 30 pcs as of May 22, 2017, when the set is taken off possible discount. Min. 10pcs.