Cutters

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 5mm Length of working part: 13.0mm Total length: 50mm Screw: 35° Clamp shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 6mm Length of the working part: 16.0mm Total length: 50mm Screw: 35° Clamping shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of working part: 12mm Length of working part: 30.0mm Total length: 75mm Screw: 35° Clamp shank: 12mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) slotting cutter Number of blades: 2 pcs. Diameter of the working part: 14mm Length of the working part: 35.0mm Total length: 100mm Screw: 35° Clamping shank: 14mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Grooving cutter, the cutter has 1 cutting edge through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steel and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 1.5mm Length of the working part: 4.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of working part: 2mm Length of working part: 6.0mm Total length: 50mm Screw: 35° Clamp shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 2.5mm Length of the working part: 7.0mm Total length: 50mm Screw: 35° Clamping shank: 4mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from diameter 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of working part: 5mm Length of working part: 13.0mm Total length: 50mm Screw: 35° Clamp shank: 6mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 10mm Length of the working part: 25.0mm Total length: 75mm Screw: 35° Clamping shank: 10mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of working part: 12mm Length of working part: 30.0mm Total length: 75mm Screw: 35° Clamp shank: 12mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling Number of cutting edges: 4 pcs. Diameter of the working part: 14mm Length of the working part: 35.0mm Total length: 100mm Screw: 35° Clamping shank: 14mm Carbide: fine-grained carbide Coating: PVD ( AlTiCrN ) Blade diameter tolerance: -0.015mm for cutters up to a diameter of 5mm (including) -0.020mm for cutters from a diameter of 6mm (including) Usage: Universal milling (roughing and finishing operations) , the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 50 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Diamond cutter 30pcs set, set of diamond surface milling cutters Stopka 3,2mm Set contains 30pcs of different technical milling cutters (rotary files) Application: grinding, drilling, engraving on glass, steel, ceramics, light metals, alloys More info on request